Splinter189
Master member
Most likely full sized first
Master Series Builds, Past Present and Future.
- Thread starter Splinter189
- Start date
Splinter189
Master member
This is the current mock up for the F14. Wing span extended is 72"
With wings folded and nose off, it will be same size as F18.
With wings folded and nose off, it will be same size as F18.
Burnhard
Well-known member
R
That thing is huge!!!
kcapps4215
New member
nice fx it adds realism. whated to find a set of prints to build my own.
Kit only. No plans.
kcapps4215
New member
and where preytell might I find the kits? I've searched and am still searching. thanks..
Mr NCT
Site Moderator
@kcapps4215, this is the place John Overstreet showcases things that are in the works to get us all salivating (and it works). All of the kits that are available can be found here:
https://store.flitetest.com/master-series/
All the master series plans that FT has released can be found here:
https://forum.flitetest.com/index.php?threads/sp0nz-plans-index.17136/
https://store.flitetest.com/master-series/
All the master series plans that FT has released can be found here:
https://forum.flitetest.com/index.php?threads/sp0nz-plans-index.17136/
It is currently not released. Keep watching this thread/forum, and the FT YouTube channels for more.
kcapps4215
New member
kcapps4215
New member
thank you for letting me know, I appreciate it
John, you are doing amazing things with foam board. Keep up the great work.
I am sure its been asked already, but...
Any chance of releasing a ~48 inch span T-28 in the future? The one on your wall on page 4 or 5 of this thread (MS Mustang size) would be a blast flying around my back yard.
The T-6 TexanII looks really fun. Any chance of plans or SBK release?
I am sure its been asked already, but...
Any chance of releasing a ~48 inch span T-28 in the future? The one on your wall on page 4 or 5 of this thread (MS Mustang size) would be a blast flying around my back yard.
The T-6 TexanII looks really fun. Any chance of plans or SBK release?
Splinter189
Master member
I will do a T28 at some point.
Splinter189
Master member
Shop had been busy. New liveries for the F4 phantom and working thru latest F14.
Splinter189
Master member
Very close to having this up in the air. Just need to make a couple tweaks.
Flyingshark
Master member
Hope that gets released soon! I could really use one in my hangar
Splinter189
Master member
5 years ago I began building RC planes. The 2nd plane I made was an F14. It always has and always be my all time favorite.
Over the last 5 years I have revisited the F14 a number of times. It had been about two years since my previous attempt.
I had decidided I didnt want to tackle it until I could nail some of the more complex lines. With some of the recent foam shaping discoveries. I decided it was time onne again😁
Today, I got the current prototype up in the air. I could not be happier.
The maiden flight was perfect. It is very floaty for a jet. it flew for a full 5 minutes.
It was very gentle with the wings out and was very stable with the wings in.
With the light wing loading, it could easily cruise around at 30-40% throttle.
Here are some highights and some pics of earlier versions over the years(including the big metal one)😁😁
Super stoked about this release. Stephen has come with a number of graphic sets including the TGM Rogue Nation livery. Additionally, he has come up with the ultimate T shirt, I can't wait to get these printed.
Check out the pics and vid of this beast😁😁
usaserres
Active member
John. I really believe that this is your greatest accomplishment to date! I just cannot wait to build this plane and show it off around our RC club and everywhere else. I speak about you guys to everybody almost everyday. I am your greatest fan. Keep up the incredible work and I just cannot wait to add this one to my FT fleet!!!
Burnhard
Well-known member
She is an absolute beauty! The F14 was the aircraft of my childhood. Love what you have created here.
I note that all your jet designs are without any landing gear. Is there a particular reason for that?
Similar threads
