So I have wanted to make a micro quad for a while now but just haven't got around to it. So I decided that I would bring it to you guys and get some ideas. So I would like to have any suggestions you might have. I have come up with some basic guidelines for this build:
1. 2-3 in. props: http://www.paragonuav.com/rx-3040t-v2-props-2cw-2ccw-white/
2. Brushless motors: http://www.getfpv.com/motors/dys-130...-ccw-pair.html
3. ESC's: http://flyduino.net/KISS-ESC-2-4S-12A-v12_1
4. Flight controller:http://flyduino.net/KISS-FC-32bit-Flight-Controller-V103_1
5. Frame ( 100mm-150mm) PD130 http://properdrone.com/product1.html
6. Vtx: http://www.banggood.com/Eachine-ET200-5_8G-200mW-Mini-Transmitter-p-972618.html
7. Camera:http://www.banggood.com/600TVL-8_0MP-14-2_8mm-CMOS-FPV-170-Degree-Wide-Anlge-Lens-Camera-PALNTSC-p-984345.html
So if anyone has any suggestions on any of these products just let me know.
*This is my first build log so bear with me.
1. 2-3 in. props: http://www.paragonuav.com/rx-3040t-v2-props-2cw-2ccw-white/
2. Brushless motors: http://www.getfpv.com/motors/dys-130...-ccw-pair.html
3. ESC's: http://flyduino.net/KISS-ESC-2-4S-12A-v12_1
4. Flight controller:http://flyduino.net/KISS-FC-32bit-Flight-Controller-V103_1
5. Frame ( 100mm-150mm) PD130 http://properdrone.com/product1.html
6. Vtx: http://www.banggood.com/Eachine-ET200-5_8G-200mW-Mini-Transmitter-p-972618.html
7. Camera:http://www.banggood.com/600TVL-8_0MP-14-2_8mm-CMOS-FPV-170-Degree-Wide-Anlge-Lens-Camera-PALNTSC-p-984345.html
So if anyone has any suggestions on any of these products just let me know.
*This is my first build log so bear with me.
Last edited: