Well it took a little longer than expected since I had to wait a new servo to arrive since my old one had quite a bit of play from a nasty crash a few weeks ago. During this time Mustang contacted me and was kind enough to offer me 3 of his Cobra 2204 1960kv motors from his hex. I couldn't pass up this offer so a trade was made and the motors found their new home shortly after they arrived.
This was the biggest upgrade to the tri, but while I was at it I got a little sick of everything I build being purple so some neon orange paracord was ordered and slapped on the wires (I told you you would be extremely disappointed jhitesma). I also figured it was about time I ordered a camera to do some recording, so I opted to get the Mobius with the standard lens. I printed out a wedge with a 15* angle so hopefully I won't be staring at the ground when flying. I also put the FPV camera plate in the front bottom slot, and the top rear slot. This gave the camera roughly a 15* angle as well.
I threw on my Orange Long Range Satellite Receiver I ordered from HK international (I got two shipped from the international warehouse for the price of one shipped from a US warehouse... Someone please explain how that's even remotely possible/economical) and put on some printed antenna holders. Thanks to Mustang's Sketchup videos I was also able to print some landing gear as a test to see how it would work. They are long enough to have about a 2mm clearance from the battery strap to the ground. Well that's enough talking, time for pictures. And yes, my Naze is only held in place by two bolts at the moment. I needed to take it back apart so I didn't install all 4 because that would have involved me searching for the other two somewhere.
And a little something for the future... I guess this is a good place to post it since it's also a tricopter...