My own design plane !! :-)

[Eddo radush]

My own design airplane went pretty gooood!

I decided to make an airplane with no plans ( all from my head).
I took the basic shape of the Simple Cub and I made it a little bit chubbier and And and wider wings so it will fly slower..
(I LOVE slow flying)

I started drawing the shape of the fuselage on the foam board

And I duplicated it. After that, I made the top and the bottom and glued them together simple as i could
(no slots, no folding)

I made the power pod pocket so the power pod seat on a flat surface with a scotch connecting it together. in the picture you wont see it but i put a piece of square foam board where the scotch is

Than I made the wings
And added the electronics.

wight with the battery: 385 grams
3 chanels

Here’s is a video showing me trying it for the first time
that @mayan took with his phone today at the field

Enjoy

 

[FDS]

Looks great! Flew super nice too.
The only advice I can offer is you need to use a sharper blade for cutting out, the rougher edges on some of those cuts indicate your blade is blunt. A pretty plane like that deserves clean edges!

 

[mayan]

I have to add that it flew great! At some point @Eddo radush handed me the Tx for me to get a feel for it and give him my feedback about his design. My words and I quote “wow it’s such a no brainer.” It was so easy to fly I basically had no thinking to do and pretty much let it fly itself.

Great job with this buddy.

 

[FDS]

It was obviously made with care as it took almost no trimming to fly well, I am not sure I saw any trim applied?

 

[Willy Nillies]

That's great! Good job!

 

[Tdugar]

My own design airplane went pretty gooood!

I decided to make an airplane with no plans ( all from my head).
I took the basic shape of the Simple Cub and I made it a little bit chubbier and And and wider wings so it will fly slower..
(I LOVE slow flying)

I started drawing the shape of the fuselage on the foam board

View attachment 137567
And I duplicated it. After that, I made the top and the bottom and glued them together simple as i could
(no slots, no folding)
View attachment 137568

I made the power pod pocket so the power pod seat on a flat surface with a scotch connecting it together. in the picture you wont see it but i put a piece of square foam board where the scotch is
View attachment 137569 View attachment 137570

Than I made the wings
And added the electronics.

wight with the battery: 385 grams
3 chanels

Here’s is a video showing me trying it for the first time
that @mayan took with his phone today at the field

Enjoy

Awesomeeeeeee

 

[Vimana89]

Very nice design! That plane makes a great trainer for sure. RET control scheme is nice and forgiving for newer pilots(and builders too).

 

[mayan]

It was obviously made with care as it took almost no trimming to fly well, I am not sure I saw any trim applied?

No trimming done on it .

 

[Vimana89]

I love this trend I'm seeing lately of people who are pretty much new to the hobby and forum getting on the fast track to cranking out their own designs👍

 

[Jimun]

My own design airplane went pretty gooood!

I decided to make an airplane with no plans ( all from my head).
I took the basic shape of the Simple Cub and I made it a little bit chubbier and And and wider wings so it will fly slower..
(I LOVE slow flying)

I started drawing the shape of the fuselage on the foam board

View attachment 137567
And I duplicated it. After that, I made the top and the bottom and glued them together simple as i could
(no slots, no folding)
View attachment 137568

I made the power pod pocket so the power pod seat on a flat surface with a scotch connecting it together. in the picture you wont see it but i put a piece of square foam board where the scotch is
View attachment 137569 View attachment 137570

Than I made the wings
And added the electronics.

wight with the battery: 385 grams
3 chanels

Here’s is a video showing me trying it for the first time
that @mayan took with his phone today at the field

Enjoy

Great job and it flew great.

 

[Eddo radush]

Here is the second video that @mayan shoot of me flying it

 

[AIRFORGE]

That's what FT is all about! Congrats!