• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.
Pumpkin drop event

NEED FLIGHT CONTROLLER HELP

Bricks

Well-known member
#2
I am not a big quad guy but if you are asking about GPS that is a separate unit and what you will be doing is pulling power off of the board only. Your wright up is a little confusing on exactly what you are asking.
 

ElectriSean

Eternal Student
Mentor
#3
I am not a big quad guy but if you are asking about GPS that is a separate unit and what you will be doing is pulling power off of the board only.
The OP is correct that he needs a UART to connect the GPS to a FC, this allows the GPS data to be displayed on the OSD and autonomous flight with iNav.

@Mileslewis - what receiver are you using? What UARTs are shown in the ports tab? You should be able to remap the LED pad to a UART Tx, but it depends on how you are connecting your receiver.
 

makattack

Winter is coming
Moderator
Mentor
#5
Heh, with iNav, they're more likely to be putting it on a fixed wing vs a quad ;)

I'm not an iNav user, yet, but I think including a full dump of the configuration in a post might be more helpful vs. a screenshot of part of it...