Not yet I don’t think. Once they have it finalized I think they will be releasing them. Welcome the the forums!Were any plans published for the Cybertruck?
Not yet I don’t think. Once they have it finalized I think they will be releasing them. Welcome the the forums!Were any plans published for the Cybertruck?
I've been so happy to start working on the P38. Thank you for posting the plans!!!!
I do have a question about the alignment of the booms. In the P38 build video, crop marks are mentioned to help with the alignment of the booms with the wings. Looking at the plans, I can see the mark (two actually) on the trailing edge of the left and right upper wing panels but none on the leading edge. Any suggestions on where I should place these? In the build video, it mentions it should be 5.5" from the fuselage but the location of the fuselage with respect to the wing panel isn't clear until it's built. Any suggestions would be greatly appreciated
Were any plans published for the Cybertruck?
OK I have seen where People have gotten the plans for the P38 but I have notr seen them yet any clues to where they are getting them.Printing Tips: https://www.flitetest.com/articles/printing-flite-test-plans
AIO = All-In-One: Includes Full-Size, A-Size, and B-Size plans in one fileFS = Full-Size: 34 x 22 non-tiled plans (fits ANSI D and ISO A1, requires a large format plotter)*TA = Tile A-Size: 7.5 x 10.5 tiled plans (fits US letter and ISO A4, standard size home printer)TB = Tile B-Size: 10.5 x 15 tiled plans (fits US Ledger and ISO A3, requires a larger format printer)*If you still do not know what size you should print, use Tile A-Size.
FT A-10 Warthog | 1.0 | FT A-10 Warthog PlansFT Commuter | 1.0 | FT Commuter PlansFT Corsair | 1.0 | FT Corsair PlansFT EZ Glider | 1.0 | FT EZ Glider PlansFT Goblin | 1.0 | FT Goblin PlansFT Legacy (Founders Plane) | 1.0 | FT Legacy (Founders Plane)FT LongEZ | 1.0 | FT LongEZ PlansFT Mini Charlie | 1.1 | 2018.09.07 FT Charlie PlansFT P-40 Warhawk | 1.0 | FT P-40 Warhawk PlansFT P-47 Thunderbolt | 1.0 | FT P-47 PlansFT Racer | 1.1 | FT Racer PlansFT Sea Angel | 1.0 | FT Sea Angel PlansFT Spitfire | 1.1 | FT SpitfireFT Twin Sparrow | 1.1| FT Twin Sparrow Plans
Feel free to make requests and leave feedback by replying to this thread.
If you see anything wrong with any of the plans listed here, reply to this thread with the details and I will correct it.
OK I have seen where People have gotten the plans for the P38 but I have notr seen them yet any clues to where they are getting them.
Hi Sponz,
Thanks for all your hard work in the plans, they are great!!
I was wondering if you will be added the plans for the monster motor mount and the control horns for servos?
https://store.flitetest.com/flite-test-monster-control-horns-servo-mounts-4-pack-flt-2106/p1144511
https://store.flitetest.com/flite-test-monster-motor-mount-2-pack-flt-2107/p1144512
Keep up the good work!
I have been going over old build videos and noticed that you do not have plans for the FT Duster.
Was this just an oversight?
Not really. What plan(s) are you looking for in B size?Sponz:
If a set of plans has no B tiles, is it possible to generate some from the A tiles?
No specific one. Just got a new 11x17 printer, and, noticed that not all plans have B tiles, and was wondering if conversion from A might be possible.Not really. What plan(s) are you looking for in B size?
No specific one. Just got a new 11x17 printer, and, noticed that not all plans have B tiles, and was wondering if conversion from A might be possible.
Thanks. Sure like your plans.
Larry
Hi, Josh and guys. I love the recent star trek ship builds.
I would love plans for both enterprise and bird of prey.
Thanks. Talk soon
Hi, Josh and guys. I love the recent star trek ship builds.
I would love plans for both enterprise and bird of prey.
Thanks. Talk soon
We need some of the other profile chuck gliders too!!