Going to need a hanger soon for all the stuff in process....
Oh yeah - as some else said on the forums here, "My wife lets me have all the planes I can hide."
This plane is on my project list too. I've also been looking at their BF109 which looks to be a good flyer that doesn't require me to buy all new batteries either. Are you going to do the FPV neck on this one? I think that's the coolest design feature on it.
With my new Prusa I've been able to do some practical printing (compared to my old Kickstarter Printrbot) - Mini Arrow fuse and plane hooks for the wall. Glad to hear another confirmation that the software upgrade is worth the expense.
LB. I see you are trying the single copter. Maybe for one of your many projects you could get with VAALLEON and do one of his monphans. I am sure you have seen his on going project here in the forums. Maybe test print the frame and ducts to test the viability of that vs the carbon fiber for him.
What RC plane hooks are you printing? I'd be very interested in printing some of those too.
the walls are ok on this, but I think the layer adhesion is the bit that I need to work on. Very interested in how others get on with this.
I think the gooseneck FPV would be an easy to bust off extension on the easymax.
It might say it's a guitar wall hook - and it works pretty good for ukulele's too - but it's really for holding planes up by the tail.
I've got about 6 of them up on the wall - mostly holding the pretty balsa stuff, but it would work great for UMX and most mini sized DTFB planes.
View attachment 81914
Could also be that you're printing with too thick a layer thickness. Try printing at 0.1mm so the layers don't have to deviate so much to get the sharp curve.
Nice Drake! Keegan made one out of foam board.
The wall hanger is nice, but I think I'm going to design my own two piece version so that you can adjust the spacing for different size planes. Thanks for the idea.