JenniferLiuPL
Junior Member
Hi,
I am design a 1.3 (All up weight) tricopter for a indoor competition.
the competition hall setup is
Description of each tasks
my selected parts / components and Thrust to Weight Ratio, All Up Weight (AUW) Calculation
(not complete yet)
Can someone please give some advice ?
Besides, thr tri frame I selected is 450mm (motor to motor)
if I use 1045 prop the overall dimension (diameter) will be 472mm (slightly large due to the proximity of the tips)
And I am planning to add prop guard on it, as my tri need to fly through an obstable with plastic chain (distance between the plastic chain is 20cm with each other)
on top of that, I will use the tail as front and the 2 motor as the back.
any comments or advice ?
Thank you
I am design a 1.3 (All up weight) tricopter for a indoor competition.
the competition hall setup is
Description of each tasks
my selected parts / components and Thrust to Weight Ratio, All Up Weight (AUW) Calculation
(not complete yet)
Can someone please give some advice ?
Besides, thr tri frame I selected is 450mm (motor to motor)
if I use 1045 prop the overall dimension (diameter) will be 472mm (slightly large due to the proximity of the tips)
And I am planning to add prop guard on it, as my tri need to fly through an obstable with plastic chain (distance between the plastic chain is 20cm with each other)
on top of that, I will use the tail as front and the 2 motor as the back.
any comments or advice ?
Thank you