kareez
Member
Hi. I’m building delta wing by using Radiolink AT9s. My delta has one aileron on the each wing. I want use only two servos as elevator and aileron. I don’t have any previous experiences with RC hobby, so I really don’t know how the servos for the aileron and elevator should be hooked up to the receiver. I connected ESC to pin 3 and left servo to pin 1 and right servo to pin 6. when set joystick left, One aileron go up and other aileron go down together. what I must do on radiolink for two servos that when joystick set in down or up, ailerons go down or up in one time?