Versa Wing receiver placement

[GBurns]

I've nearly completed the Versa wing with the pusher configuration.
I am using a 6 channel Lemon Rx The receiver has some type of "wrap" that can go around it to protect the circuit board, I suppose.
What is a good way to install it into the wing? I am considering using a doorway on the bottom, aft of the spar. What is a good way to stabilize in in the wing?
Thanks.

 

[Merv]

In the past, I’ve used the door way method, it works great. I put mine on top, forward of the spar, I’m sure on the bottom, aft of the spar would work just fine. I got tired of cutting more holes in my wing. Now I access the Rx through the hole I cut for the battery. Just push the Rx into the hollow of the wing, to the side of the battery.