broken

Quick fpv view of a crash on takeoff because I forgot to secure the battery and it slid forward. Glad I got it on video and luckily it's repairable I think. Hopefully this works for the video https://photos.app.goo.gl/ivwZxymf1uqBJiEe8

So I received my new Wizard X220s yesterday, and got the first sets of flights in today. Crashed a few times with no issues besides some mud that was cleaned off while batteries recharged. Unfortunately, after a very minor crash from a 2 foot hover, none of the motors spin now. Everything...

Hi, I broke my USB port on my Omnibus F4 Pro, and i dont know how i can connect the FTDI-Adapter to the board. If i google a How-To i can only find some "normal" F4 boards.:( Here is a Sketch of my board: and here is my Adapter: i hope someone can help me.

FomieDM came up with the idea. basically a place to share crashes just for fun or for people to learn from. also a good way to find weaknesses in certain designs if they tend to break in one place a lot.

So, I flew(and crashed) my quad and now one of my rotors won't spin, is anything stuck there???? Help please, video here: https://youtu.be/R6cnqCfynEM

Hi All, I have recently put together my first FPV setup and my first impression was that everything looks extremely red, when I point the camera to the sky everything looks blue but anything else and its red. When it gets dark it looks like the camera goes black and white, this looks clearer...

Hey Everyone, here is my story and question: I have about 30 flights on my Parkzone Su29mm, and I am now rather consistent at smooth flights. It is actually rather simple to land, and I am just starting to explore some advanced 3D maneuvers. Very fun plane and looks great. Unfortunately last...

Im looking for broken/used 9x or as similar as possible. i need some of the parts that are inside and i can't find anywhere where they sell parts. Im willing to pay for the shipping and some for the 9x preferably in the states.

I am new to RC, but plan to really try to get into it. My first investment into the hobby was an FT Racer. Bad choice? I'd say. I definitely should have either started by buying a RTF, or scratch building a simpler, easier-to-repair plane like the snowball or flyer. Anyway, I made a stupid...

I am building an rcexplorer v3 tricopter my motors are from ready to fly quads t-motor ms2212 the motor wires are breaking. two of the three motor wires have broken, one was deep inside the motor the break was in the winding's ends the other was right at the housings edge I don't know how to...

I have noticed that each time the "guys" fly without landing gear they never break a prop. How do they do it? Do they have a programmed ESC with a brake or just something that keeps the prop stopped in the same position. I would like to learn. Anyone that can help would be appreciated.

Hello all. I just got the Aprentice S 15e after owning the mini super cub and the parkzone um p-51d. The DX5e is however, my first full range digital tx. All has been well after recieving the RTF setup on friday. I flew it and it worked. Now, however, the radios trims do not function or even...

So let's say you just watched your fair share of flitetest videos. You get the urge to fly, you buy a nice inexpensive trainer plane, and you fly. Or to be more accurate, you fall. That is the worst feeling in the world. I know because my older brother was having his 6th flight on my Hobbyzone...

I went out flying today and ended up somehow crashing and snapping the antenna wire in half on my Turnigy 9x receiver. Is it possible to fix this? I have read that the length of the antenna is incredibly important so if it is fixable, how do i do it and what exact length do i need to have the...

I have been trying and trying to succeed with the openlrs for months now, and have random on and off successes and failures. I have bought 2 modules and 2 receivers, and at the moment I cannot get any combo to work, and I have run out of ideas or resources to move on. I get about as much range...