frsky

FrSky Taranis X9d with extras! $275 obo (sold) I have a FrSky Taranis X9D RC transmitter. Everything is practically new. I bought it from a guy who only used it a couple times and I haven't used it because I would spend to much time playing with it instead of my airplanes. It uses an open...

Well, I'm coming back to the hobby. I maidened a plane for the first time in 15 years or so, and I finally got a quadcopter in the air as well. Things are falling into place nicely and I'm starting to question how I was away from this hobby for so long.... I feel like i'm making the finishing...

Just finished my first multi-rotor build. Most everything works great (as far as I can tell being a newb) except that the voltage I am receiving through telemetry is lower than the voltage I directly measure from the battery using a multimeter. My tx displays 2.8v per cell and my multimeter...

I've seen various threads on the internet about modding 2.4Ghz receivers to get better range. There have also been very scientific findings posted as to what is and isn't happening. Today I set out to see if I could improve the range on my equipment. Here's what I have done. I have been flying...

Just in from FrSKY! The new TARANIS X9D PLUS Haptic Vibration Feedback System which provides an alternative feedback system to the existing voice and sound. An overview of features Large 212*64 backlit LCD screen Quad ball-bearing gimbals with high quality potentiometers Numerous input...

hello guys. i have a problem i am hoping someone can help me out. I have a turnigy 9XR that i loaded OPEN tx on it. im using a Frsky tx and a D4R-ii on CPPM mode in a mini quad.. the flight controler is a Flip32. ok.. so here is the problem.. when i am seting up the receiver in the Baseflight...

All Sold All Sold

All Sold All Sold

I have completely snapped off (and lost) one of the receiver antennas from my FrSky X8R receiver. How would I go about replacing the wire? I know this particular model has plastic things on the ends of the antennae (which get in the way and help to snap off the wire in case of a crash...

My story begins when I began to notice some very poor performance from my MacBook Pro. The internet connection seemed to slow to a stop now and then. I tried all the simple things like virus scans and rebooting the router to no avail. But then one day, I was messing around with my Turnigy 9x...