frsky

Hello, my name is Griffin and I am relatively new to the fpv scene. recently I purchased a Furibee x215 pro and need to replace the current RX(a frsky xm+) with a flysky compatible one, I just have a few questions. -Is this new RX compatible with the FC...

Had a few instances today where I would lose control mid flight. One time there was a visible RX Loss warning in the OSD as I loss control. Two other times losing control resulted in a slow flip, but there was no RX Loss warning. Luckily all times nothing was damaged because I was low to the...

The SxR (S6R & S8R) receivers provide stabilization, level, knife edge and hover flight modes. Setup instructions and tips for the SxR have been gathered from a number of different sources and put in a blog post. Check out the blog post and video. https://youtu.be/XIe9nsuOJtU...

In RF D16 mode 16 channels are transmitted if the channel range is set to 1-16. The bind option determines if the servo pins are mapped to the first 8 channels or the second 8 channels. Further it also determines if telemetry from the receiver is turned on or off. This is useful when using two...

Hi, I just switched from Spektrum to FrSky on my 4 quadcopters. I do have a connectivity issue it seem, but it is pretty weird as it behave, or not behave... I spent a lot of time troubleshooting, please let me know if you have anything else then: 'it should work'! I am willing to try anything...

Which transmitter should I buy? That is a question often asked and understandably so. This hobby has historically been cost prohibitive for many and the transmitters alone are a large part of the investment. Therefore, some forum members have assembled the most recommended transmitters...

This script mimics the start sequence for quad racing. Pilots get their quads ready on the start line. They then return to their seats and get ready to race. The race official tells them to arm their quads and then after a random delay sounds a start buzzer. To use the script: The pilot...

I have published an OpenTX Manual with help from the developers and community members. The manual is accessible by going to RCdiy.ca and clicking the OpenTX Manual link on the top menu bar. http://rcdiy.ca There are a number of ways to use this manual using the OpenTX Manual links on the right...

Hello benevolent Forum Members! I just got finished soldering up an FT Gremlin, but would someone please help me out with the Betaflight setup? It's being uncooperative... I'm using a Frsky XM receiver, so when I configure the receiver in Betaflight, I choose 'Serial Based Receiver' and...

I have published two new videos and documentation on setting up OpenTX to display Head Speed. Head Speed By Configuring An OpenTX RPM Sensor http://rcdiy.ca/heli-head-speed-sensor/ https://www.youtube.com/watch?v=hdnJ-Ml94w0&feature=youtu.be Head Speed Using A Lua Script...

Hello there! This is like 7th place I post this in. I have read every single google link with related keywords. No answer. At this point im exhausted, and have'nt even tasted RC hobby yet. So two weeks ago I received my QX7 Taranis. I had also ordered a XSR-E receiver for it. As soon as I got...

In the build video for the Gremlin quad there is a Spektrum receiver recommended. I would like to use an Frsky radio. Can someone recommend a receiver that is compatible with both the Frsky transmitter and the flight control board? Thanks, John

I have published a new video and documentation on setting up the FrSKY RPM sensor in OpenTX. This is a precursor to the video on a lua script that calculates head speed. The script has been contributed by Attitude RC. Blog Post http://rcdiy.ca/frsky-rpm-sensor/ Video https://youtu.be/A3AlY6spy_Y

I had a lot of trouble with interference this year at flite fest east. Last year I had very little trouble, I even flew in the world record flight. This year I crashed repeatedly. I was using orange recievers, but I went to the store and bought spektrum recievers. This didn't seem to help...

A new playlist consisting of 6 videos has been published. These videos accompany documentation written and updated by me in a blog post and the official OpenTX GitBooks manual. Blog Post http://rcdiy.ca/opentx-sounds-announcements/ Documentation...

Instructions http://rcdiy.ca/taranis-opentx-s-port-firmware-flashing/

OpenTX 2.2 has been released! I’ve produced a blog post and video that goes over - Installing the microSD Card - Connecting the Tx & Computer - Downloading, installing & Configuring Companion - Backing Up The Tx - Downloading & Writing OpenTX To The Tx - Downloading & Copying The SD Card...

Aloft Hobbies has a NiMH Charging Kit for the Taranis Q X7. I’ve installed in mine and have documented the steps in a blog post and video. http://rcdiy.ca/taranis-q-x7-nimh-charging-kit-aloft-hobbies/ https://youtu.be/P8JQkIlSbhs Check out the blog post and video. Stay Safe & Have Fun

I'm a bit of a newbie and i'm having some issues with my taranis i recently picked up. It works perfectly in simulators, its bound correctly to a frsky xm+(atleast the steady green light is showing), but rates are not shown in cleanflight. In cleanflight i've set Reciver to serial-based reciver...

http://rcdiy.ca/gps-directions-home/ https://www.youtube.com/watch?v=Cb7SlKAHbFU This GPS script was published last year. A viewer requested that the script be updated to use an optional second GPS sensors. One on the aircraft and another in the transmitter. This allows a pilot who does cross...