graupner

Getting back to the hobby again, I'd like to do what I did not manage when i was ~15 in ~1990: flying (and be able to control) my Graupner ASW 22. The plastic fuselage is less white now, and might be weaker than it used to be. I've replaced the rudder and elevator servos and swapped the standard...

hi there flight test hive mind! i'm new to the hobby, just build a tiny trainer with my daughter, gona maiden it today, chuck glider at first. i did just try out the controlls and i works!!! now to the technicals. power pack A in the Uk is from Graupner, it comes with an Ultra control 20a...

Hi I bought an FT sea duck , but i cant get the differential thrust to work:cry:. I have the Graupner MZ-10 transmitter and the gr12l reciever. Im using channel 2 and 3 for my aillerons and elavator, and im using channel 5 and 6 for the differential thrust that doesnt work. Ive watched the video...

Hi everyone, I got a Graupner mz-10 a while ago, and was hoping to be able to use it with the Liftoff simulator. I did a little googling, but it seemed like most solutions online wouldnt work for this model. Is it possible to connect this controller to my computer? If I can't do this with...

Hi, couple days ago I started building a new drone with raceflight revolt V3 flight controler. I connected everything and the last step i need to do is connect the flight controler to the reciver, unfortunately i don't know how to do this with a graupner GR-12L reciver. Someone knows how to do it?

Hi! I recently got the Liftoff flight simulator in hopes of learning how to fly without destroying a quad (which I already did, almost immediately), and I'm interested in using my Graupner mz-10 in it, as well as my Fat Shark Attitude v4 goggles. I did a little googling, but I couldn't figure...

Which transmitter should I buy? That is a question often asked and understandably so. This hobby has historically been cost prohibitive for many and the transmitters alone are a large part of the investment. Therefore, some forum members have assembled the most recommended transmitters...

Hello all, Sorry if this has been asked before, kindly point me to the right thread. I've had a Graupner MZ12 for over a year now, really happy about the radio. I use it with three planes, moving the receiver back and forth. Today when I was going to fly I couldn't get the transmitter to bind...

Heya FT Forum - I'm selling a Graupner MZ-12 radio and 2 GR-16L receivers out of the Boston metro area - http://www.ebay.com/itm/Graupner-MZ-12-and-2-GR-16L-Bundle-Excellent-Condition-w-Original-Packaging/282622129202 Let me know if you're interested.

Greetings, I am a newbie starting to get into race quads and am trying to start my first build. I was interested in building the new Flite Test Gremlin as it looked like the perfect starter kit for me. My problem is I have the Graupner MZ-12 transmitter and GR-16L receiver combo and I am on a...

Greetings, I am a newbie starting to get into race quads and am trying to start my first build. I was interested in building the new Flite Test Gremlin as it looked like the perfect starter kit for me. My problem is I have the Graupner MZ-12 transmitter and GR-16L receiver combo and I am on a...

I recently purchased the Graupner 250Q Alpha RTF FPV combo pack from the store along with Fat Shark Attitude V4 goggles. The manual says the copter should be already set to broadcast FPV with the included Helistar FT591 set to group D and ch4. I replaced the included dipole antenna with an...

I recently purchased the Graupner 250Q Alpha RTF FPV combo pack from the store along with Fat Shark Attitude V4 goggles. The manual says the copter should be already set to broadcast FPV with the included Helistar FT591 set to group D and ch4. I replaced the included dipole antenna with an...

I'm very new to the hobby, and have recently bought the Graupner Alpha 110 FPV BNF, the Graupner MZ-10 transmitter, and a pair of Fatshark Attitude V4 FPV goggles. I tried turning on the transmitter and was able to control the Alpha 110 for maybe 5 seconds, and then the transmitter made the...

Hi all, I'm having a failsafe issue with my Versacopter V2, which otherwise is flying awesome and taking some serious abuse very well! :) After switching my receiver and flight controller board to SUMD from PWM, I can no longer get the failsafe on the radio/receiver to work. When powering off...

I have a bunch of Graupner equipment. Everything is in very good working condition. MZ-18 with hard case and cords for updates GR-12L receiver (telemetry compatible) GR-18 flight controller GR-24L receiver (telemetry compatible) Alpha 110 with a spare battery and a four channel battery...

Hello Flite Test community! I've been getting more into flying FPV quads lately, but with the way this semester has been going at school, there doesn't seem to be enough hours in the day to practice. I love flight simulators and have purchased Velocidrone recently. I have previously made an...

Hello I bought a Eachine X220 ARTF, and thought that it would be easy to just connect it to my Graupner gr-18 and use my Graupner mz-12. But i cant find a way to get it to work. I have set the receiver to use SUMD from ch6 and them connected the x220 to this channel. I also have tried many...

I just built the FT Sea Duck. I have all the electronics installed and I have my radio configured exactly per the FT video "HOW TO : Differential Thrust". The servo indicator shows the mixes working properly. However, when I raise the throttle, the motor only runs for less than a half second...

Graupner GR-24L - $55 shipped