• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

model

  1. flitetest

    Plane FT Tiny Trainer 1.1

    FT Tiny Trainer Designed By: Josh Bixler Plans By: Dan Sponholz **New plans updated to the latest format** This is still the same classic design that was originally released over 5 years ago. Description: Now made with the new Maker Foam the Flite Test Tiny Trainer is even better! The Tiny...
  2. flitetest

    Plane FT Spitfire Master Series 1.0

    FT Spitfire Master Series Designed By: John Overstreet Plans By: Dan Sponholz Description: The Master Series Spitfire is a classic warbird that provides as much satisfaction in building it as it does flying it! Utilizing Master Series build techniques and designed by John Overstreet, the build...
  3. 20181020_103125.jpg

    20181020_103125.jpg

  4. 20181020_101353.jpg

    20181020_101353.jpg

  5. 20181020_093022.jpg

    20181020_093022.jpg

  6. fliteadmin

    Plane FT P-47 Thunderbolt 1.0

    FT P-47 Thunderbolt Designed By: John Overstreet Plans By: Dan Sponholz Description: The P-47 is the second plane of the Flite Test Master Series developed in collaboration with John Overstreet. Using "mold-together" techniques, the FT P-47 is just as rewarding to build as it is to fly. This...
  7. fliteadmin

    Plane FT Commuter 1.0

    FT Commuter Designed By: Ben Harber Plans By: Dan Sponholz Description: The FT Commuter is a community design by fellow Flite Tester Ben Harber. It is an intermediate build and flies as you would expect a small trainer. It can be set up as a bank and yank with aileron and elevator control or...
  8. flitetest

    Plane FT P-40 Warhawk 1.0

    FT P-40 Warhawk Designed By: Andres Lu Plans By: Dan Sponholz Description: The FT P40 is a Flite Test take on a classic design. Simple build techniques allow this plane to be folded together in hours and result in a flight experience that an intermediate to advanced pilot will enjoy. Add the...
  9. flitetest

    Plane FT Corsair 1.0

    FT Corsair Designed By: John Overstreet in collaboration with Flite Test Plans By: Dan Sponholz Description: The FT Corsair represents a new chapter of Flite Test scratch built aircraft! Using techniques developed by John Overstreet which he has also used in his metalworking, this plane uses...
  10. flitetest

    Plane FT EZ-Glider 1.0

    FT EZ Glider Design by: Josh Bixler Plans by: Dan Sponholz Description: The FT EZ Glider is a great introductory build to introduce you to the Flite Test line of DIY Airplanes. It's simple design and polyhedral wings allow for the EZ Glider to be built and flown with ease. Adjust the control...
  11. flitetest

    Plane FT Spitfire 1.1

    FT Spitfire Design By: David Windestål Plans By: Dan Sponholz Description: The FT Spitfire is the 10th design in the swappable series and the first of which that is a warbird. This is the perfect gateway into scale-like flying and is also a good introduction into four channel flying. This...
  12. N

    3D Printed Boeing Secret Stealth *PROJECT*

    This is my most ambitious project yet... I have had a 3D printer for about a year and a half and have had many attempts to create a 3D printable aircraft with little success to date. UNTILL NOW. I have been working on this model for a little over a week and it is to a point now where I am...
  13. D

    AMA words on FAA registration

    AMA recommends you hold off registering until the deadline in February. They are asking you to contact FAA. Here is the link to the letter from AMA dated December 28, 2015...
  14. C

    Aircraft to use in university project

    Hey everyone! I'm just at the beginning of a university project where we're going to be testing some equipment on the ground, measured from a UAV. We're still not sure what platform to use, so I'm now investigating the possibility of using a fix-wing (instead of multirotor). Anyway, I would...
  15. R

    R7 Mutlirotor Model Maker Space: Batbones, electrohub, anycopter, etc.

    Hey friends! I want to start this thread for anyone out there "fiddling with" Real Flight R7 models, specifically multirotors. If you've built a model for the software, want people to test/give feedback or want to grab someone else's creation. This is the place to do it. I'm going to be working...
  16. A

    747

    I would really like to see someone build a Boeing 747 with all four engines being EDF. I understand that it would have to be fairly large for the EDFs to be to scale, but you could carry around a model space shuttle on it's back! It would also be pretty nice for FPV if it were built that large...
  17. G

    Flitetest in danger because of new FAA rules!!!!!

    Beyond banning fpv goggles this new interpretation of the rules (june 2014) by the FAA effectively bans ALL commercial flying of model aircraft, such as team flying demonstrations from factory reps and I would assume by the language in the rulemaking you folks at Flitetest who produce videos...
  18. T

    Bluebaby model for RC Deskpilot

    After much inspiration from rcspaceflight I've been modelling several planes for RCDP this is the first one I'm ready to release! I look forward to feedback and plan on making more models. If you have any requests for new planes please let me know. So this is the bluebaby 33in by Tony65x55 at...
  19. Johan

    I made a rough Bat bone 3D simulator model

    Hi, After building a bat bone for real (no flight time yet), I though that it was a pity that my training simulator does not show the actual Bat Bone. Since it was raining here anyway, this was a great opportunity to refresh my Blender 3D modeling skills (if any ...) So I grabbed one of the...
  20. C

    A teacher's ceiling

    I took this picture while I was fixing some ethernet tacking in a teacher's room while they are on summer break. Mind you, this is only one half of his room that i got the picture from so there are more model planes to be seen.