servo

So I'm in a slightly awkward situation. I have an X-29 with movable canards and modified with a landing gear. I'm unable to get it off the ground and I think I'll get one flight out of it then build something else, already lost my patience with that one... I also have two 1100kv NTM 28-26 motors...

I am looking to purchase a Flysky FS-I6x transmitter for a project that I am working on. The issue I keep running into is how I am going to control 4 separate servos with 4 switches. I need to turn a servo about 120/130 degrees from starting position and return to start. From my understanding...

I have a UMX A-10 with an odd servo problem. When I move the rudder stick, about half of the time the servo will go in the desired direction but will stick for a bit, come back, and then will usually start jittering like crazy. I also noticed that the servo motor becomes EXTREMELY hot. Other...

I have an E-Flite Timber and have been having a problem with the right aileron servo jittering when the stick is in a certain position. Rebinding and wire rerouting haven't helped. It only started after I replaced the other aileron servo, but I have no ideavwhy that would have any affect...

Enjoy FREE SHIPPING on your favorite Actobotics & RC parts starting now - May 29th! https://www.servocity.com/

I recently bought a Durafly Spitfire Mk24 V2 from HobbyKing, and assembly was going fine until I had trouble with the flap servos. They were pretty close to being centered, but one flap was clearly not matching the other. The servo arms have an S on one end, and an adjustable eyelet at the...

There are many factors to consider when choosing the right servo for your application and one of those is how fast your servo will move . In our Latest Secret Life of Servos video, Kyle explains how to calculate servo speed.

In our latest Secret Life of a Servo series Jason dives into the world of understanding the measurement of servo torque! https://www.servocity.com/servos

We're celebrating National Robotics Week with our second largest SALE of the year including FREE SHIPPING on orders $75+ and: 25% Off Hitec Servos 10% - 15% Off Futaba Servos 65% Off Servo Extensions 30% - 60% Off Actobotics[ https://www.servocity.com Not only are we having a massive sale...

Kyle talks servo gear materials in our latest Secret Life of a Servo series video https://www.servocity.com/servos

Save up to 95% OFF RC favorites like chargers, transmitters, receivers, batteries and more!! So hurry while inventory last! Offer not valid with other discounts/promotions. Now - March 15th https://www.servocity.com/bargains-blowouts

Get the most out of your servos with these 5 Essential Servo Attachments! https://www.servocity.com/servos/servo-accessories/servo-attachments

Valentine's Day is around the corner so we're showing our appreciation for our customers with 15% OFF our ENTIRE SITE! https://www.servocity.com

Check out our new PWM Meter Browse our full line of Servos

PWM Meter - $19.99 Need to know what PWM signal your receiver, robot or servo controller is sending? Simply plug in our PWM Meter to see a readout of the PWM signal in microseconds (µsec). If you wish to pass that signal on to your servo or device, just plug into the other set of header row...

A Servo to Shaft Coupler offers a simple and solid way to attach a shaft in line with the output spline of a servo! Available in both 24 Tooth (C1) Spline and 25 Tooth (3F/H25T) Splines. https://www.servocity.com/servos/servo-accessories/servo-attachments/couplers/clamping-servo-to-shaft-couplers

Hopefully this helps someone. I had an aileron servo on a Tiny Trainer lock up when glued down. I took it apart to see if I had melted the gears and I had not. The potentiometer (position sensor) under the output shaft had been overheated and locked in place. This was a 4.7 gram servo and...

I've been working on building an FT Seaduck. Everything's been good so far. I wasn't able to get my hands on a Power Pack C so I just bought the individual components I needed, however I forgot to get servo extensions. The local hobby store had more than a few of these at a semi-reasonable price...

Take advantage of our largest servo sale of the year (now through August 3rd) and get up to 20% OFF ALL Servos and 60% OFF Extensions! Click here to shop the SALE! 20% OFF ALL Hitec Servos 60% OFF Extensions Up to 15% OFF all Futaba servos Connectors Security Clips Bulk Servo Wire

I have a wizard x220 betaflight 3.1.1 and have activated servo_tilt but inorder for that to work I need to remap my output pins in the cli using "resource" but when I type in "resource" it just lists the resources and if I type a command for example: "resource MOTOR 5 none" or "resource SERVO 1...