If you wanted to build the J7W2 variant, I feel like you could get away with using the bottom part of the V-stabs as skids if you're landing in grass and it's a mini-sized plane anyway. Those squared off-surfaces look like they'd be less prone to damage than the taller ones of the J7W1, and you could reinforce the edges at least with hot glue, if not also some barbecue skewers. The Pun Jet and Vector kind of have similar surfaces protruding below the wing and they seem to survive belly landings.
If you wanted to build the J7W2 variant, I feel like you could get away with using the bottom part of the V-stabs as skids if you're landing in grass and it's a mini-sized plane anyway. Those squared off-surfaces look like they'd be less prone to damage than the taller ones of the J7W1, and you could reinforce the edges at least with hot glue, if not also some barbecue skewers. The Pun Jet and Vector kind of have similar surfaces protruding below the wing and they seem to survive belly landings.
Thanks y’all! We just couldn’t seem to find a good solution by ourselves. Guess we will try this first and if it works….Yay! If not back to the drawing board.
Hello everyone, I need help on the shinden. (I know, time crunch.) But I’ve designed everything but the skins so far, and I need help with it, does anyone want to team up and help design skins?
Hello everyone, I need help on the shinden. (I know, time crunch.) But I’ve designed everything but the skins so far, and I need help with it, does anyone want to team up and help design skins?
What exactly do you mean? If you’re asking how much I’ve gotten done, everything but the skins, the battery hatch will be cut out once build is completed.
What exactly do you mean? If you’re asking how much I’ve gotten done, everything but the skins, the battery hatch will be cut out once build is completed.
Oooh, okay. Just I have been learning how to use FreeCAD 3D/2D designer and if it wasn't that hard I was thinking I might be able to help. (been watching nerdnics plane designing videos)
Oooh, okay. Just I have been learning how to use FreeCAD 3D/2D designer and if it wasn't that hard I was thinking I might be able to help. (been watching nerdnics plane designing videos)
This week Matt and Joe discuss custom skins and walk through skin creation. Discord Feedback: Email us @ AviationRCNoob@gmail.com, matthew@aviationRCNoob.com, joe@aviationRCNoob.com Say Hi on our Facebook Page Tell us how we’re doing – FliteTest Forums Show Page Help others find the podcast by...
This week Matt and Joe discuss custom skins and walk through skin creation. Discord Feedback: Email us @ AviationRCNoob@gmail.com, matthew@aviationRCNoob.com, joe@aviationRCNoob.com Say Hi on our Facebook Page Tell us how we’re doing – FliteTest Forums Show Page Help others find the podcast by...