• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

Help! FT Spitfire Motor/Prop Selection

#1
I recently purchased the FT Spitfire speed build kit, and I was wondering what the proper motor and propeller combo would be. I already have an E-Flite Park 480 (910kv), so if I could use that, that would be great.

On their store page, it says to use a 10 x 4.7 prop slow fly. What would be the right prop for speed? Maybe a 9x6?

Thanks,
Jack

link: https://store.flitetest.com/flite-t...-airplane-kit-1080mm-flt-1007/p673671?b=24954
 

Ranger_107

Elite member
#2
I recently purchased the FT Spitfire speed build kit, and I was wondering what the proper motor and propeller combo would be. I already have an E-Flite Park 480 (910kv), so if I could use that, that would be great.

On their store page, it says to use a 10 x 4.7 prop slow fly. What would be the right prop for speed? Maybe a 9x6?

Thanks,
Jack

link: https://store.flitetest.com/flite-t...-airplane-kit-1080mm-flt-1007/p673671?b=24954
Yea. A 9x6 prop should be ok, just make sure you dont overload your esc.
You might have to be a little more high on the throttle, but I think it should work out just fine