Hello everyone! Please participate in this forums challenge if you want. The goal is to make an all around, twin engine, trainer style STOL plane. that sounds like a lot, but here are the requirements:
- Must include some type of plans, or measurements and description
- Must be compatible with floats and skis (plans for them must be included in submission)
- Must use something similar to power pack a twin
- Max. wingspan 40 inches
- May use other parts of other planes as plans
- must have a successful flight before submission.
- Have fun!
- optional, but recommended, STOL (like the twin otter)
- The prize is bragging rights and me sending you a really cool surprise 3d printed pen!!
Please post down below if you want to participate. hoping to get at least 5 designs.
OH! and by the way, the deadline for final submissions is march 31st. this might be extended.
Edit!! twin engine is not needed, neither are the plans for floats. look at
@The Hangar's submission for a good example. I get that this has turned into more of a challenge for "what should I build next" now it is a what can you come up with! the most unusual designs will be counted the best, but the only requirement if you have a single motor is that it is not in the front of the plane. (This is for newbies, fro not breaking the prop when crashing)