Gremlin Trouble

[Graylegocity]

For some reason I can't flash anything on to my board. So after trying many times I went on with the build. Later when programming my quad my receiver map would not display my transmitter movement. I am using a DX6e and the same receiver in the vid. I have the correct channel map and the correct port, but it won't work.

 

[ElectriSean]

Flashing problems are usually caused by driver issues, many people have success with the ImpulseRC driver fixer - https://impulserc.com/pages/downloads

After you get it flashed, try the receiver setup again. If you still have problems let us know.