I have two quadcopters for sale. Both are practically new. Selling because I have another 250 that I fly a lot more often than these.
The HobbyKing Spec FPV250 is RTF and a fairly clean frame. It flys ok, but I prefer the Naze32 board over kk, so I would recommend picking one up with it. The FPV250 includes an 808 #16, which is also used for FPV. The 808 has just a touch too much lag for racing and tricks, but is good for learning. I have a mini CMOS camera available if wanted.
HobbyKing Spec FPV250 frame, with extra parts
RFT1806 2300KV Black motors from ReadyToFlyQuads
12A Afro ESC's with SimonK firmware, soldered in
KK-Mini Flight Controller
HobbyKing Mini Power Distribution Board
808 #16 camera with live-out for fpv, no micro SD card included
Skyzone TS5823 200mW vtx, standard antenna
Turnigy 5 channel Transmitter(mode 2) & Receiver 2.4ghz
Transmitter converted for use with 14500 size batteries
4x 14500 size batteries are included, no charger included
4x Turnigy 3S 1000mah 25C-35C LiPo cells
2 sets of 6020 carbon fiber props (best with 3S)
2 sets of 7020 carbon fiber props (best with 2S)
USB flash tool
Asking $250
Mini CMOS FPV Camera 520TVL 120deg Field Of Vision 0.008LUX 14 x 14 x 29mm (NTSC)
Will sell with FPV250 for an additional $15 (MUCH BETTER FOR RACING AND TRICKS)
The HobbyKing X550 was my first multirotor frame. It is BNF and has gone through many different variations, finishing with this one. Very very clean frame with all wiring and electronics internal for best protection. There is still space to plug a USB cord for settings and firware updates. It is super strong and can fly with GoPro and 2 battery packs with ease.
HobbyKing X550 (folding)
eBay 2212 1000KV motors
20A Afro Slim ESC's with SimonK firmware, soldered in(inside arms)
MultiWii PRO Flight Controller w/MTK GPS Module, soldered in(inside plates)
SkyZone TS5823 5.8GHz 32CH A/V 200mW Mini FPV Transmitter, LHCP antenna
Quanum Power Distribution Board and Dual UBEC In One
OrangeRx R800X DSMX Compatible 8Ch 2.4Ghz TwinPort satellite
Antenna holder
4x Turnigy 3S 2650mah 20C-30C LiPo cells
XT60 parallel conector to fly with 2 packs
Lots of Red & Black 1045 props
Care-free crab landing gear, used for battery and GoPro mounting (will include legs)
Homemade flying lights
Asking $300
GoPro Hero 3 Black Edition(pictured) with remote and three batteries, waterproof case, no micro SD card
Will sell with X550 for an additional $150
Prices are negotiable. They can be bought separately or together, but buyer is responsible if shipping is needed. Located in Gardena, CA. Local pick-up recommended.
PLEASE EMAIL ME FOR MORE PICTURES, AS NOT ALL WILL NOT UPLOAD for some reason. SORRY!!
shaneok7@gmail.com
The HobbyKing Spec FPV250 is RTF and a fairly clean frame. It flys ok, but I prefer the Naze32 board over kk, so I would recommend picking one up with it. The FPV250 includes an 808 #16, which is also used for FPV. The 808 has just a touch too much lag for racing and tricks, but is good for learning. I have a mini CMOS camera available if wanted.
HobbyKing Spec FPV250 frame, with extra parts
RFT1806 2300KV Black motors from ReadyToFlyQuads
12A Afro ESC's with SimonK firmware, soldered in
KK-Mini Flight Controller
HobbyKing Mini Power Distribution Board
808 #16 camera with live-out for fpv, no micro SD card included
Skyzone TS5823 200mW vtx, standard antenna
Turnigy 5 channel Transmitter(mode 2) & Receiver 2.4ghz
Transmitter converted for use with 14500 size batteries
4x 14500 size batteries are included, no charger included
4x Turnigy 3S 1000mah 25C-35C LiPo cells
2 sets of 6020 carbon fiber props (best with 3S)
2 sets of 7020 carbon fiber props (best with 2S)
USB flash tool
Asking $250
Mini CMOS FPV Camera 520TVL 120deg Field Of Vision 0.008LUX 14 x 14 x 29mm (NTSC)
Will sell with FPV250 for an additional $15 (MUCH BETTER FOR RACING AND TRICKS)
The HobbyKing X550 was my first multirotor frame. It is BNF and has gone through many different variations, finishing with this one. Very very clean frame with all wiring and electronics internal for best protection. There is still space to plug a USB cord for settings and firware updates. It is super strong and can fly with GoPro and 2 battery packs with ease.
HobbyKing X550 (folding)
eBay 2212 1000KV motors
20A Afro Slim ESC's with SimonK firmware, soldered in(inside arms)
MultiWii PRO Flight Controller w/MTK GPS Module, soldered in(inside plates)
SkyZone TS5823 5.8GHz 32CH A/V 200mW Mini FPV Transmitter, LHCP antenna
Quanum Power Distribution Board and Dual UBEC In One
OrangeRx R800X DSMX Compatible 8Ch 2.4Ghz TwinPort satellite
Antenna holder
4x Turnigy 3S 2650mah 20C-30C LiPo cells
XT60 parallel conector to fly with 2 packs
Lots of Red & Black 1045 props
Care-free crab landing gear, used for battery and GoPro mounting (will include legs)
Homemade flying lights
Asking $300
GoPro Hero 3 Black Edition(pictured) with remote and three batteries, waterproof case, no micro SD card
Will sell with X550 for an additional $150
Prices are negotiable. They can be bought separately or together, but buyer is responsible if shipping is needed. Located in Gardena, CA. Local pick-up recommended.
PLEASE EMAIL ME FOR MORE PICTURES, AS NOT ALL WILL NOT UPLOAD for some reason. SORRY!!
shaneok7@gmail.com
Last edited:
