Today I was playing with this and found out that the trim settings do carry over, but if the student radio has trims too, then those are applied on top of the trims from the trainer radio. So what worked well was to switch the student radio to a new blank model profile.
Also, I bought my training cable from HobbyKing for $6.99.
https://hobbyking.com/en_us/oranger...-for-tx6i-tx10i-fs-i6-fs-t6-transmitters.html
Lastly, I wanted to mention that I get some erratic behavior from the radios in training mode sometimes. The servos will sometimes act very jumpy and won’t move smoothly. Kind of like if it were getting bad reception. Turning the radio off and then back on again seems to cure it. I’d be interested to know if anybody else has experienced that.
PS, I know this is two years old, but I wanted to post for other people looking for this. There‘s hardly any information on the internet about FlySky training mode.
https://edubirdie.com/top-writers has top writers with big experience.