Had to add a notch on the back panel as well for the elevator rod.
Things got a little messy as I’ve been figuring out the aileron servo situation, but it’s all together anyways.
You can see even with the servo flag on the spar the pushrod angle is still too steep, so the servo should really be flat on the wing itself, not on the spar.
Things got a little messy as I’ve been figuring out the aileron servo situation, but it’s all together anyways.
You can see even with the servo flag on the spar the pushrod angle is still too steep, so the servo should really be flat on the wing itself, not on the spar.