Selling - Aluminum Power Pods and firewall (custom made)


Junior Member
Flite Test Aluminum Power Pods and Firewall (custom made)

Did a test run seeing if I could make my own aluminum flite test parts at the metal fab shop I work at, I made a few but it's been a few years now so I don't need them anymore. There's 4 pods and 1 firewall. They are all made from aluminum. It's pretty raw still so it could use some sanding to get those corners smoother.
It will last you a lot longer than foamboard! They were made a few years ago so if Flite Test has changed any of their dimensions since then, these might be slightly different than the standard flite test power pod.

I'm also selling it on ebay.

I'm looking for about 20 bucks out of it, (buy pays for shipping )


  • cover.jpg
    2.8 MB · Views: 0
  • DSC00670.jpg
    1,019.9 KB · Views: 0
  • DSC00673.jpg
    1 MB · Views: 0
  • DSC00676.jpg
    882.1 KB · Views: 0
  • DSC00679.jpg
    888 KB · Views: 0
  • DSC00682.jpg
    536.3 KB · Views: 0
  • DSC00685.jpg
    428.4 KB · Views: 0
  • DSC00691.jpg
    316.3 KB · Views: 0
  • side view.jpg
    2.9 MB · Views: 0