FeWolf
Member
As a Noob to pdf printing, you may want to include how to turn it off?!
your Ugly Wonder page 3, wing has a ton of pink.
Also you ever consider KMF wing?
http://bloodymicks.com/Funbat_plans.pdf
your Ugly Wonder page 3, wing has a ton of pink.
Also you ever consider KMF wing?
http://bloodymicks.com/Funbat_plans.pdf
Hey FeWolf. Very good point. That's the kind of feedback I am looking for. One of the reasons that I decided to try adding the color is because my plans are created with the layers available in the PDF. So if there is some formatting that you don't like, or don't want to print, you can turn that layer off. The shading for the parts is the same way. There is a SHADE FB, SHADE PD, and SHADE PW layer for foam board parts, poster board parts, and plywood parts respectively. If you don't like all the cross hatching for the cavities, that layer can be turned off as well.
I know that you'll have to remember to do that before you print, and that's a bit of a drawback. What are your thoughts on that?
Last edited: