Spitfire76's Build Log of a CL-415 (Super Scooper)

Spitfire76

Well-known member
Trying to decide on a scale and want the plane to be a reasonable size. Since the full scale wing span is over 28m I am going to try 1/20 scale which would result in a 1.4m wingspan and so one half of the wing will fit length wise on one sheet of foam board.

I believe these are the drawings that Mike Roach used to base his 1/24 scale depron design that's on Outerzone.

 
Last edited:

FoamyDM

Building Fool-Flying Noob
Moderator
Trying to decide on a scale and want the plane to be a reasonable size. Since the full scale wing span is over 28m I am going to try 1/20 scale which would result in a 1.4m wingspan and so one half of the wing will fit length wise on one sheet of foam board.

I believe these are the drawings that Mike Roach used to base his 1/24 scale depron design that's on Outerzone.

great plan 3-view
 

Timmy

Legendary member
Yes it is, this was your post that I found from July 2022. Do you have some later ones of your CL-415 ?

Time flies I guess (puns)
This is a picture of it right after i finished it. Its still intact so if you want more pictures I can take some when I get home
1728427239184.jpeg
 

Spitfire76

Well-known member
Time flies I guess (puns)
This is a picture of it right after i finished it. Its still intact so if you want more pictures I can take some when I get home
Thanks, it looks really great. What scale did you use ? Have you flown it ?
 
Last edited:

Spitfire76

Well-known member
Looks like @Liam B had the intension to build a CL-415 back in 2017

 

Spitfire76

Well-known member
I am closing out this potential build thread for a couple of reasons. Firstly, I haven’t been successful in sealing foam board from the water and secondly I’ve decided to complete my numerous unfinished plane projects particularly the 3dprinted ones.