• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

Testing Out New DTFB Scratch-built FPV Plane

#1

Greetings,

Would love to get thoughts on the plane and the video, I have PDF plans and have been thinking of doing a build video and FT article, let me know if there is interest in this type of plane.

Dimensions:
~54" Wingspan
~40" Fuselage

Setup:
30amp Red Brick ESC
Turnigy 9 gram servos
Turnigy L2210A-1650 Brushless Motor (180w)
9x4.5 Prop
Turnigy 9x
Fatshark Predator V2 goggles and receiver
Fatshark 250mw transmitter
 

Flat4

Senior Member
#2
Nice flying, looks like a fun plane. Really enjoyed the crash at 2:17, must have watched it five times trying to figure out how the camera came off the plane and stuck itself to that pole. Still a mystery.

Also welcome to the forum!!!
 
#3
Nice flying, looks like a fun plane. Really enjoyed the crash at 2:17, must have watched it five times trying to figure out how the camera came off the plane and stuck itself to that pole. Still a mystery.

Also welcome to the forum!!!
Thanks so much Flat4 glad you enjoyed it. Heres a video of the crash slowed down, had a second camera on that pole, was trying to fly 'close' to it... mission accomplished.

 

Flat4

Senior Member
#4
Ahh, makes much more sense now. Thanks for the clarification, looks like you had a blast making that video. Keep it up.