So I’m building my first drone Technically. I’ve helped people build drones before. I just got the Naze32 today and wired everything up correctly with no bridges. So I’m getting signal from my transmitter on my laptop through Cleanflight and I can spin the motors up with the slider bar and calibrated the ESCs. Then I went into the receiver tab and and armed the drone then pushed my throttle up and nothing. So I went to CLI and checked the status and nothing wasn’t not letting me arm so I went back and still nothing. But when I arm it it shows that I’m moving the throttle in the configurator. Idk what to do, I’m in a bind.