Flite Risk
Well-known member
DJI Flamewheel airframe (Hex)
DX18
Dragon link v2.
Naza 32 FC (dont know what version)
Dont know what version of the Dragon klink software in on either RX or the TX. That will be next on my list (where can I find a TTL?).
This rig was given to me by a dear friend who could not figure it out and though I might be able to. I've tried and tried. Tabled it. And am back to it.
Blinking lights, that's what I got. That's all I got. (see the vid)
The DX18 has had a power supply hack (who ever put this together knows what they are doing) but that makes me wonder how the bind process happens when compared to the process without the power hack, the whole hold the momentary bind button power on thing.........
So do you hold the bind momentary, plug in the 1/8" trainer port, then switch on the DX18?
do you hold the bind momentary, Turn on the DX18, then plug in the 1/8 trainer port?
The DX18 seems to get power when the 1/8" trainer plug is plugged in.
Here is a video I just took with lights a blinking, let me know if there is a specific sequence you would like to see me get on video.
After more digging, this is what I found:
I followed the instructions as described here at minute 3:16
I have the pins 5&6 jumped, properly powered.
This is what I get, 3 L.E.Ds. operate in this fashon;
red constant on
greed fast blink for about 2 seconds, stays on until blue is finished
blue fast blink for about 2 seconds, slow flash once
both blue eynd green go out simultaneously, red still on
See the video here :
I have reached out to Dreagon Link, no word back........
DX18
Dragon link v2.
Naza 32 FC (dont know what version)
Dont know what version of the Dragon klink software in on either RX or the TX. That will be next on my list (where can I find a TTL?).
This rig was given to me by a dear friend who could not figure it out and though I might be able to. I've tried and tried. Tabled it. And am back to it.
Blinking lights, that's what I got. That's all I got. (see the vid)
The DX18 has had a power supply hack (who ever put this together knows what they are doing) but that makes me wonder how the bind process happens when compared to the process without the power hack, the whole hold the momentary bind button power on thing.........
So do you hold the bind momentary, plug in the 1/8" trainer port, then switch on the DX18?
do you hold the bind momentary, Turn on the DX18, then plug in the 1/8 trainer port?
The DX18 seems to get power when the 1/8" trainer plug is plugged in.
Here is a video I just took with lights a blinking, let me know if there is a specific sequence you would like to see me get on video.
After more digging, this is what I found:
I followed the instructions as described here at minute 3:16
I have the pins 5&6 jumped, properly powered.
This is what I get, 3 L.E.Ds. operate in this fashon;
red constant on
greed fast blink for about 2 seconds, stays on until blue is finished
blue fast blink for about 2 seconds, slow flash once
both blue eynd green go out simultaneously, red still on
See the video here :
I have reached out to Dreagon Link, no word back........