ZMR250 Quad Build Log - My first quad build

[offaxis]

Guys, I'm looking for help finally making this quad into an FPV machine. I have an overcraft pdb that I'm planning on using to clean up the wiring.

Things I'm looking to get:
OSD
FPV Camera ( highest resolution with lowest latency, i heard those were the 400tvl ones but can't find them)
vTX
Antenna set
vRX
FPV Goggles/screen (best but on a budget)

Please provide me with links, that would be great!

 

[SnowRocker88]

600TVL board camera
http://www.securitycamera2000.com/p...0TVL-D%2dWDR-Board-Camera-For-FPV-%2d-US.html

And while you're there you can get a vTx and vRx
http://www.securitycamera2000.com/p...ireless-FPV-Transmitter-and-Receiver-Kit.html

I think latency is more dependent on your vTx/vRx than it is your camera for the most part. And from what I've seen only the WiFi Tx/Rx setups have that high of latency.

 

[offaxis]

I think latency is more dependent on your vTx/vRx than it is your camera for the most part. And from what I've seen only the WiFi Tx/Rx setups have that high of latency.

In a video that I watched, I think one of the rotor riot guys mentioned that they used a 400tvl. Reason being that the vTX can't transmit that high of a definition and it saves just a fraction of latency because of the 400tvl camera. Don't know if thats true or not but its what i remember.

Thanks for the links!

 

[SnowRocker88]

In a video that I watched, I think one of the rotor riot guys mentioned that they used a 400tvl. Reason being that the vTX can't transmit that high of a definition and it saves just a fraction of latency because of the 400tvl camera. Don't know if thats true or not but its what i remember.

Thanks for the links!

So, I went back and looked, and THIS is the exact camera I'm running with that RunCam Tx/Rx setup I linked (except I bought mine from Amazon).

http://www.securitycamera2000.com/p...WDR-Color-Board-Camera-OSD-Menu-DNR%2dUS.html

If there is any latency it is imperceivable. I'm running with the 2.8mm lens BTW.