- Type
- 3D Print Files (STL, G-code, etc.)
This is the release of my modular F-104. It is designed to be 3D printed in PLA or ABS (optional for some parts). It is a 6-channel design and flies on a 4s 4000 mAh battery up to 80 mph.
This release contains full STLs, G-code, and an instruction manual detailing assembly. The supplied G-code is for PLA since ABS frequently requires more tuning. The G-code is split into two parts due to upload size limits.
Important note: Add a washer between the wheels and the main gear struts. Otherwise the wheel will slowly suck plastic from the gear strut into itself and jam.
The development process is documented in my Modular Plane Thread:
This release contains full STLs, G-code, and an instruction manual detailing assembly. The supplied G-code is for PLA since ABS frequently requires more tuning. The G-code is split into two parts due to upload size limits.
Important note: Add a washer between the wheels and the main gear struts. Otherwise the wheel will slowly suck plastic from the gear strut into itself and jam.
The development process is documented in my Modular Plane Thread:
A Modular Plane Design - My Next Big Project
More and better footage, this time from takeoff all the way through landing. I had three successful flights today and even started to try out some basic aerobatics. It's no F-22, but it's decently maneuverable. I have the flight timer set to 3 minutes and come down with about 30% left, but for...
forum.flitetest.com
