1. S

    Solved [Lemon Plane] Eflight P-51D 1.2mm Mustang w/ DX6E transmitter - SAFE not working

    Hi, I am new to this hobby but not so new that I have absolutely no idea how things work. I take a lot of time and effort into learning something before I go and do it. But for some reason I am having trouble getting the gear and flaps to work on my E flight mustang. I've gone through the set up...
  2. NealisNeal

    Help! Wondering about binding an old(ish) transmitter with FrSky receiver

    Hello Everyone! I am returning the world of RC airplanes (I was very into it but have fallen out the past couple of years), and I was wondering if I was able to bind a quadcopter's FrSky D8 - SPI BUS receiver to a Spektrum DX7s transmitter. Thanks for any input (Go easy on me I am new to the...
  3. K

    Horizon Blade Nano QX Transmitter binding problem

    I purchased a brand new Blade Nano QX today, charged the battery, and flew it one time today; now I can’t get the transmitter to bind with the quadcopter. I’ve read the instructions, followed them too a tee, and still cannot get them to sync. Has anyone else had this trouble?
  4. F

    Help! xm+ receiver not flashing

    hi everyone. ı try to bim my xm+ receiver with my taranis but receiver always has solid red and green lihgts so ı try to flash my receiver but ı always get module not responding error . how can ı fix this problem. ı tried all firmwares for xm+ like lbt or fcc but it didint work. please help me
  5. D

    Difficulty binding with my first drone I built, arming a problem too

    Greetings, I have watched the FT 210 build video a dozen times or so, and think I built my drone correctly. I used a FPV Radiance flight controller - Light up the sky’s and a FrSky D8R-II plus receiver with my FRSky Taranis plus X9D radio. I went through the BetaFlight procedures like in the...
  6. S

    Spektrum DX5e binding troubble

    Im looking at getting a Walkera Rodeo 150 and already have a Spektrum DX5e transmitter. In order to save a few bucks im looking at getting the bind and fly model but dont know if it will bind with the transmitter. The receiver on the Rodeo 150 is a DEVO-RX716, and the DX5e is 5 channel 2.4ghz...
  7. P

    binding problems - alpha 110 and graupner mz-10

    I'm very new to the hobby, and have recently bought the Graupner Alpha 110 FPV BNF, the Graupner MZ-10 transmitter, and a pair of Fatshark Attitude V4 FPV goggles. I tried turning on the transmitter and was able to control the Alpha 110 for maybe 5 seconds, and then the transmitter made the...
  8. W

    Trouble Binding XM Receiver to Q X7

    Hello everyone, I'm having trouble binding my Taranis Q X7 with an XM receiver. I followed what I thought was the proper sequence. Transmitter on, then found an open receiver space, presses [Bnd], and heard the chirps coming from the transmitter. Then I held down the bind button on the receiver...
  9. X

    BeeBrain Flight Controller - Tiny Whoop

    Hellow everyone, so I'm having some trouble binding my BeeBrain FC to my DX6. I've tried holding the bind button on the FC, and holding it while plugging in the battery and my DX6 will not bind to the stupid thing! Also, Beta flight won't recognize the quad when it's plugged in.... I just...
  10. R

    Ughhhhh Graupner binding.......

    Hello to all from the great first state of Delaware! So I am trying to use a 2.4Ghz MLP4DSM Rx from a blade nano qx with my Graupner Gr-12L-HoTT also n2.4ghz. For the life of me I can not get them to bind. Firmware issues with the Gr-12? Seat to keyboard error? I am stuck. I dont know what...
  11. J

    How do I put two aileron servos into a fs-iA6 receiver?

    On the FS-iA6 receiver, there is only one slot available for ailerons. I have two servos. One for each aileron. So, Im confused with how this is supposed to work. This is my first scratch build. Thanks
  12. C

    Turnigy RF-9xV2 and FS-iA6B

    All, I have been trying to bind my Turnigy Tx (9xV2) to a receiver I just bought, the Flysky FS-iA6B. I know they both use the Flysky Protocol, but I can't get them to bind for some reason. I've bound original receiver and looked up the process, its pretty simple, so I don't think it's an...
  13. M

    Spektrum binding issues

    I have a spektrum DX6i transmitter and an AR636 reciever, I am following all the undoing steps for the receiver and it won't. Bind. I insert the binding plug, connect the flight battery, then step away at least 6 feet (recommend by Spektrum Support), power on transmitter in bind mode, I get a...
  14. R

    Dx5e not binding to..... anything?

    Dx5e not binding to..... anything? [FIXED] Hi, Preface: I am working on a build of the Versa wing and I just got all of my electronics. Excited to try out the new receiver I got, I plugged it into a powered esc and my servos and I flicked on my transmitter, only to find that although it looks...
  15. M

    Hi guys! Noob question about dlg "build"

    Hi guy, Noob from Vienna, Austria here. I have a quick nooby question concerning my plan to buy and "build" the Hobbiking Mini DLG: I am planning to bind my MLP6DSM transmitter (from a HH Sport Cub S) to the OrangeRx R410X DSMX Compatible reciever I am planning to use. I learned that you can...
  16. B

    FlySky module binding issue

    I'm looking at upgrading my TGY 9x Radio for the FrSky Taranis. However having 10 models each with their own 9xV2 RX makes the upgrade much more expensive than first thought when considering changing out all the receivers. I've looked into the FlySky module with the idea of using that to bind my...
  17. B

    Sim binding problem.

    Hi, I am building my first quad copter and before I put it up in the air I want a simulator to practice on. I downloaded the old version of the heli-x (because it is free) and I have no clue on how to bind my transmitter to it. I am using a 9XR transmitter a windows 8 computer. could you guys...