electrohub

hello, i was wondering what your p and i gains and limits are for the flitetest electrohub for FPV. and also when i have the auto level off and i fly it still is in half auto level because the quad twitches a little bit, like when i come to a stop now i am using a kk2.1 with one of the latest...

Hi, I recently got the electrohub kit and the electronics pack from Ready to fly quads. I was having problems with the initial take off so I connected everything up to the MultiWiiConf and added Angle mode to the gear switch on my transmitter. Since then when I arm the quad and move the throttle...

So I just recently got the mutlirotor itch. This is my second attempt at building a Tricopter. I originally put together a Batbone but flew it promptly into a building destroying both front motor mounts... lesson learned:black_eyed:. So the Electrohub kit just came out and I thought I would give...

I'm a resident of Grand centre (Cold lake south) Been watching flite test for six months, big fan of what they do. And decided to take the plunge with both feet, and built a custom "Dead cat X-quad" I'm waiting on some servo leads from HK, And looking forward to the maiden flight. Part list...

I am intending to purchase the Naza M V2 kit. I have the Electrohub Quadcopter kit being shipped as I write this. I want to know if this Naza MV 2 kit is compatible with the Electrohub Quadcopter kit. If so, why is it compatible with it. If not, explain and could you recommend kits similar to...

Hey Guys, I'm new to the forum and need a we bit of advice. I'm in process of building an Octo-copter with the Electrohub booms and plates, though I have no idea on how I'm going to go about soldering/connecting all the components together and what battery(s) I'm going to require. Run down...

Something I completely over looked... Prop mounts have those two little holes in them for a good reason, so you can use a small tool to get them good and tight... I my biggest fear is not that I will crash, it's more that after a bad crash it may not fly the same as before. :black_eyed:

Hey guys this is my first "full size" Quad, I just want to thank Flite Test, Altitude hobbies, Ready to fly quads, and Hobby King, for doing their part to bring multi rotors to more people like me =D

I am building my new Electrohub Spider Quad, but I ran into an issue, I can't mount my Turnigy 4s LiPo. The battery is just too big for the tray, and it hits the nuts that connect the tray to the frame. I can strap the battery to the bottom of the tray, but then the landing gear aren't long...

Here is everything you get with the Electrohub Quadcopter Kit, but don't just stop at quads! Tri, Hex, Octo, it's all possible with the new hub. If you're looking for just the power distribution plates, click here. RTF Quads offers an ElectroHub Electronics Kit that you can customize...

Brand newbie in my infancy of crashing doesn't want to crash this nice hub. I ordered a wood Anycopter hub and got a plastic Electrohub with solder points. I asked where the wood ones are and the reply was to go with this. Offers?