fpv

  1. image.jpg

    image.jpg

  2. GiantAntCowboy

    First Mountain Test Flight!

    Hey guys, for a while I've been building, testing and tuning with the goal of improving my TX signal and VTX range. Finally I felt confident enough with the setup to attempt exploring the mountain behind my house. It's not the most amazing run, but excited with the accomplishment and wanted...
  3. Oldbrass

    Made an FPV camera mount!

    So... Yah! I made an FPV camera mount for my planes. There are a couple of different bits to adjust the height for various aircraft. I made it in Tinkercad and printed mine in PETG on an Ender 3. I hope it's useful to some of you! Cheers! https://www.thingiverse.com/thing:4776937
  4. K

    Fpv issue - working fine taking off then a huge amount of static when flying

    firstly thanks for viewing this thread I have a Eachine Wizard x220 fpv drone that i bought and i have had it for a little while practicing my fpv drone skills sometimes crashing it into the grass and the other day i crashed it and decided the battery was low enough that i brought it in and...
  5. ark

    Twin Boom Simple Stick Pusher

    Thanks for your help with my questions about using bevel cuts vs a/b folds (I'm now a huge fan of bevel cuts) and also about adding weight or making it longer to get the right CG (I had to make it really long!). I finished my Twin Boom Pusher based on the Hangar Simple Stick and maidened it...
  6. S

    SOLD

    Meant to get this stuff sold a while back and life got in the way of even that. Complete package ready to get the new FliteTester off the ground. All you need is Foamboard, hotglue and tape to get in the air. - Spektrum DX8 - Original Lanyard, Charger, Bind plug Ect. - LemonRX 6ch DSMN...
  7. F

    Help!! Don’t want to fry my fc!

    So, I’m on my first build... I have an Avenger 225 race frame. I’m running the Zeus f722 mini stack, with AKK 2300kv’s.. on 4S. So, everything was going smooth.. seemed to be a clean & easy build... until I go to give this guy some power. Ran betaflight ✅ Checked all my solder ends/joints...
  8. D

    Help! Good stationary FPV camera/fpv camera cooling?

    I have a project where I need a small camera to stay in one place like a security camera and stream in real-time to a monitor. I have experience with FPV so I used an fpv camera, and I got it working but the camera gets very hot, is there any cameras that don't need cooling, or are they any good...
  9. W

    I need help on Banggood please

    I am trying to get this item for free so that I can get into fpv flying so if anyone who has an account can slash/click the button to reduce the price, it would be greatly appreciated. Please help me slash it! https://banggood.app.link/https://banggood.app.link/mIo81zkAVbb
  10. D

    Looking for a suitable receiver...

    I just bought a Eachine Tyro 89 and I already have a Spektrum Dxe. I'm looking for a cheaper (~15-20$) rx that'll work with both...
  11. T

    looking for FPV pilots around annville PA

    Hi everybody, i just moved to annville PA, and I'm looking for some places to fly some freestyle fpv with my drone within 50 miles of here. If there is anybody in this area and knows of some good bandos/ open fields, etc.. then I'd love to meetup and fly together.
  12. Flyingshark

    Help! FPV Camera/VTX for FatShark Teleporter V4?

    I have a FatShark Teleporter V4 FPV headset from a Nano QX. I'm hoping to put an FPV system on a plane, and I'd like to use the headset I have with a new camera setup. I don't think it's possible to remove the AIO camera from the quad, so I'm hoping you guys might be able to help with finding a...
  13. Ranger_107

    Drone Gerbil Whoop 40mm Cinewhoop. .5

    This is a 40mm cinewhoop. it runs off tiny whoop sized motors with 8.5mm mounting holes and a 16x16 FC. It's a pusher, so you print it upside down. there is three parts- the spacers, the top plate, and the main frame. you need to print four spacers. otherwise, i would print it in 50+ infill and...
  14. S

    Help! DJI FPV, crashed, now my videos playback at fast speed.

    Was flying my fpv drone, with the DJI HD FPV system. Had a nasty crash. To my surprise, nothing broke, atleast visibly. I can still fly, and the video is nice and smooth. However, when I playback any footage, it's superspeed. I can look at the videos, and see that the recording before the crash...
  15. 2jujube7

    FPV resolution/mega crash

    Hi guys. I'm kinda a newbie to fpv, and I just got my second camera yesterday and did my first flights with it on. The camera is 1200TVL, but the resolution that I'm recording and watching from my ground station is 640x480. I'm kinda confused, do I need a DVR in the plane to get the good...
  16. Nathaniel Stuart

    FlySight Falcon FG02 for sale

    https://www.ebay.com/itm/124335943508 In excellent condition with some extras thrown in.
  17. 2jujube7

    FPV reccomendations

    I currently have a cheap $20 all in one camera that I've been using on all of my planes (pretty much all scratchbuilt ft planes) The camera that I have now is 600TLV, and I really enjoy flying with it. However, the range isn't so good, as well as the quality. I spent an hour or so looking for...
  18. 2jujube7

    Cheap FPV camera/TX reccomendations

    I currently have a cheap $20 all in one camera that I've been using on all of my planes (pretty much all scratchbuilt ft planes) The camera that I have now is 600TLV, and I really enjoy flying with it. However, the range isn't so good, as well as the quality. I spent an hour or so looking for...
  19. Cpl Goertz

    Goggle advice

    Hi everyone. I ordered a betafpv starter kit 2 which comes with box goggles. I was wondering if it would be worth upgrading to some Fatshark attitude V5's right off the bat or upgrading later. Any help would be fabulous. Thanks Cpl. Goertz
  20. T

    Trying to control a servo on a remapped TX pad.

    I've been flying my fpv quad for the past few months and want to add a servo to the build. I saw another thread saying you could use a tx pad to send a signal to a servo so I've been trying to do that. I've remapped it in the CLI to be a servo, I've checked "SERVO_TILT " in the config tab, and...