racing

pls like and sub video https://www.youtube.com/watch?v=IzUsfs1EbZM quad specs trying out the new blackout motors from bolltrc 2206-2350kv pilot alex genovese jr cam man Zarak Khan supplier bolt rc http://boltrc.com/ quad bolt 250 esc-little bee 20amp motors-blackout fc-naze32 props-hq5x4.5...

Hey guys check out my new video flying on an abandoned trail in the woods. This was filmed at the tail end of summer, but I just got around to editing it. My radio has a range problem so that's why I'm only flying such a short stretch of trail. With my new Taranis I'm hoping to fly the entire...

hello, i just wanted to share my video. its a video shot with a 250 size FPV quadcopter, i hope you guys like it. if you like the video please subscribe to my channel for more fpv racing action

For the last couple of months i was thinking about making a 180 size quadcopter, but i had my doubts. I thought it was perhaps too small. But a couple of weeks ago i saw someone fly a 180 size quadcopter (a epiquad) and i knew i wanted to make one. See the 2 video's for the complete buildlog...

Someone from a dutch forum ask me if i could make 10 degree tilted motormounts for a mini racing quadcopter. After doing some research i found a good way to do this. The mounts are made from hard PVC so they are much stronger than the 3D printed mounts and they fit 22 size motors. If anyone is...

Hello guys! Im not very active in forums etc but i wanted to share this with everyone. In the last couple of weeks i was designing a new mini 250 size quadcopter for racing. Watch the video below! Comments and suggestions are very welcome! I want to keep improving my mini quadcopters!

Hey guys, Just thought i would share my lastest build, Build: ZMR 250 6" Naze 32 (who really needs F3) Rotorgeeks V2 30A RCtimer 2208 2600kv (thanks Cyberd) HQ 6045 1800mah 4S 800mw 1.3Ghz Sony 600tvl Super HAD mini CCD 30 degrees tilt Thug PDB This is my Old 280 Night hawk served me...

Sometimes flying in circles is a relaxing day at the field. Other times you are literally flying in a circle and trying hard not to crash. There is a neighborhood in town with a circle that was built in anticipation of new houses. To this day the lots remain vacant and the circle goes unused.

So I don't usually post my videos on the on the forum since I make them fairly regually and most are not that good from my perspective. But I thought this one might be a fun one to share since I tried to add a bit more fun into, sort of mimicking one of SilentGlovesFPV videos. Any thoughts or...

Hey guys i am wondering what your PI settings are for your racing quadcopters PLEASE RESPOND thanks :)

Any input is appreciated :D. I already have a DX6i so went with the LemonRX but might switch to OrangeRX depending on performance. Got 5030 props to start and 6030 to advance and will get HQ 6030's or HQ 6045's when I get real serious. Also looking for input on what OSD to get. Let me know if I...

Hey Guys, I am thinking of buying a legitimate frame after my cheap carbon 280 EMAX frame, personally I like the the Strider because of the in built OSD but i also know that the QAV and Blackout fly really well, whats your opinion? QAV 250 http://www.lumenier.com/products/multirotors/qav250...

I have been flying quadcopters for quite some time but mainly have been rtf. I really want to make a multirotor for fpv racing. I'm stuck on the fence between trying to make a 250 class quad or a tricopter as I like the yaw characteristics of a tri and they are relatively cheaper to make. Any...

Hello world, So I have decided to step into racing quadcopters. As usual due to financial constraints and me not being a good enough pilot to justify a good expensive frame I have decided to build one myself. I had a look at the “proper” frames and tried to replicate it, knowing that I might end...

Hi all, I've decided that my next multirotor build will be a mini racing quad. I may purchase a carbon fiber frame, but traditionally I design and cut my own frames out of plywood. The issue is that I have no idea what makes a good racing frame, and I need your opinions. Here are my current...

So today some friends and I had a quad race down at our local RC club. Needless to say, I'm going to need more power to be competitive. So instead of flying my 5030 props, I'm going to give some 5040 and 5030 3 blade props a shot. But when I do this, my current consumption will go up. This in...

I would really love the flight test guys to do some fast pylon racing with your swappables or scratch built racers, high speed, huge banking, and a high chance of things goings bad, what more would you want for a fun day with friends :D

Hello, This is my first post on this forum, and I'd like to share a project I just began last night. I am relatively new to electric models, so take everything below with a grain of salt! I was inspired by the Flight Test video "100 MPH for under $100.00", and the concept of a cheap speed...

It's not really about RC models, but some of you may like it (it features some aerial sequences too as friends of mine had quadro and hexacopter flying with GoPros over the place). Event is called Amateur American Car Racing (AACR - AWSA is the Polish acronym) and it was the fourth edition...