wmmc01@gmail.com
Junior Member
Sorry to be a bother, two areas I am confused on Electrohub Spider build with RTFQ kits:
1. Was I supposed to solder two of the motor leads flipped to get the twp that spin in the opposite direction, or is it based on the port the ESC's connect to?
2. Someplace, I thought in the FT Build video I saw how to calibrate the ESC's with the transmitter but I can't find it again. When I search online I find only examples using a special firmware for the Flip 1.5 board. I'm sure the video I saw was pretty simple, but not sure.
I'm not very progressed, but have the motors soldered to the ESC's. Newbie to soldering too. Arms drilled, painted.
Thanks in advance!
Bill
1. Was I supposed to solder two of the motor leads flipped to get the twp that spin in the opposite direction, or is it based on the port the ESC's connect to?
2. Someplace, I thought in the FT Build video I saw how to calibrate the ESC's with the transmitter but I can't find it again. When I search online I find only examples using a special firmware for the Flip 1.5 board. I'm sure the video I saw was pretty simple, but not sure.
I'm not very progressed, but have the motors soldered to the ESC's. Newbie to soldering too. Arms drilled, painted.
Thanks in advance!
Bill