Oooo! I'm in for the goblin! I've never participated in one of these before, but I'll see if I can do it. I won't be able to make it to FliteFest though, I'm down in FL.
The goblin is one of my favorite planes. I already have a cad model half way finished from a while ago when I wanted to build it ...maybe I'll start working on that again. Are 3D printed parts off limits? I don't have an EDF (except umx Habu... which is way too small), will probably end up as a pusher
I also have a Baby Bugatti mostly done with a partial round fuselage (front section only). Experience from that should help.
Side note: I'm pretty sure the goblin was a flying wing. There weren't any control surfaces used for elevator on the tail. The first itiration had a smaller rudder I believe as well.