OliverW
Legendary member
Google translate time!!🤣🤣
Any 3d or just not this 3d ?
- Thread starter sundown57
- Start date
I looked at a couple videos and it looks really easy to use so tomorrow I’ll try a print and see what happens.
Wildthing
Legendary member
DO you not have a translate option, mine does.
I’ll check that out when I get back from flying - just heading out the door.
So upon trying my first print it does appear that the extrusion block is clogged. The printer is doing everything OK but nothing is coming out. Does that sound like what would be causing the issue?
Is that the same thing as the extrusion block?
Wildthing
Legendary member
Nozzle threads into the block, that little guy right at the bottom
. Pre heat the nozzle first so the plastic is melted or soft and then they come apart easier.
OliverW
Legendary member
Then soak the nozzle in acetone for a few hoursNozzle threads into the block, that little guy right at the bottom
Pre heat the nozzle first so the plastic is melted or soft and then they come apart easier.
Ok - is that nail polish remover?
Oh, I see - thanks - will do.Nozzle threads into the block, that little guy right at the bottom
Pre heat the nozzle first so the plastic is melted or soft and then they come apart easier.
@Wildthing I figured out how to translate the page. I am looking at how to fix it now.
OliverW
Legendary member
It is similar
Would nail polisher work?
OliverW
Legendary member
I dunno. I would google it lol!
Lol ok!
Wildthing
Legendary member
Put those on the to buy list, I think all of them are the same thread and are cheap plus can get them almost anywhere. I just replace mine
. The block and the hotend are another to have spares of.
Ok, so just something like this? is .4mm the right size?Put those on the to buy list, I think all of them are the same thread and are cheap plus can get them almost anywhere. I just replace mine
https://www.ebay.com/itm/20PCS-0-4m...=2028003011894a06f9ca85524bac9eadc4ea39fe4aa4
Wildthing
Legendary member
Similar threads
