How did the tooth picks work???
I was already digging through my box of goodies to see what else I can come up with.How far into sensorless ESC theory do you want to get a headache? Short story: Full throttle characterized the feedback loop so they got efficient. Prop changes the input timing towards retard default. Sometimes it doesn't decay on turnoff. Just because your end is done correctly doesn't mean the internals are. Get some better motors.
I see you guys carry kills from one plane to the next, with us the kills only stay with one plane and if unrepairable you start at zero.
I lose track of whos who!
I lose track of whos who!
That is exactly what happened to me last time we had 12 planes up and windy, every one was getting farther and farther away. I lost track and ended up in the dirt, before I could figure out which plane was mine.
She looks like a streamer killer!Finally a little progress, just been busy lately, no flying or building it seems. The new combat Baron which I think I will name Shredder is coming together. The new slightly larger motors are V-Spec 1808 2400kv from HK, HK had them on special for $4.99 . To keep the amp and volt draw down I am under propping all motors so I can last 6 or so minutes. The V-Spec motors will be spinning the Azure 3X6.0X3 prop , 18A HK esc. Both motors at WOT draw 10.5 amps and have decent thrust. The main motor is the Turnigy 2826 10T 1400kv motor, and with a 40A esc. Normally I run the APC 10X5E prop which is huge thrust but at a cost of battery life so to save fuel it will run a 8X4.5MR APC prop . With all 3 motors at WOT I am just a hair over 30A draw and doing a vertical thrust test she jumps up really easy so good that way. Incase one of the outside motors gets tangled in a streamer or knocked off the plane plus because there will be no diff. thrust controls they are hooked up to the kill switch. View attachment 141388 View attachment 141389 View attachment 141390 View attachment 141391 View attachment 141392 View attachment 141393 View attachment 141394 View attachment 141395 View attachment 141396