I will post SVG(laser cut) files for ft planes

[aaronbear]

I just recently got a 5w laser cutter and wanted to cut some planes, I couldn't find any files for the ft planes, so I traced them in fusion and exported them as SVG files, the first plane I cut was the Nutball, I attached the file below.

(Edited by aaronbear to remove svg file)

 

[Flying Monkey fab]

Um, FT quit posting new plans in vector format for a reason. Unscrupulous were taking them and making cheap knockoffs of the planes and selling them as original FT planes.
Please don't distribute SVG files of someone else's work. Trace for your own use all you want, I do but don't distribute them.

 

[aaronbear]

Um, FT quit posting new plans in vector format for a reason. Unscrupulous were taking them and making cheap knockoffs of the planes and selling them as original FT planes.
Please don't distribute SVG files of someone else's work. Trace for your own use all you want, I do but don't distribute them.

alright, I will delete the file from the thread, thanks for letting me know I didn't know this was a problem

 

[AIRFORGE]

@aaronbear You can upload svg's to a thread, or to the Resources section of the forum as long as the plans are your design, or plans that are not copyrighted.

 

[aaronbear]

@aaronbear You can upload svg's to a thread, or to the Resources section of the forum as long as the plans are your design, or plans that are not copyrighted.

yes, I deleted the first svg and I do not plan to upload svg's of ft planes anymore

 

[Flying Monkey fab]

alright, I will delete the file from the thread, thanks for letting me know I didn't know this was a problem

Thank you for understanding!