• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

Motor issues, need help

I finally figured out my receiver setup and have my arming switches and modes set, when i went to the motor tab in betaflight i was able to test up and move my motors but found the wrong ones were spinning so i went to the cli and changed one motor (to see if it would work) now none of my motors fire up regardless what mode im in and also only motor 1 has motor values. all the other ones are stuck at zero. and when i went to try and recalibrate the esc to see if that would do anything and it doesnt play the beeping song. if anyone has discord and could help me let me know. thanks
Last edited: