Paulobrasil
Junior Member
I did a Scratch quadri using for emax 22812, ESCs Turnigy Multistar 15A , MultiWii MicroWii ATmega32U4 Flight Controller (http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=22321&aff=247441) and propellers 10x45 GF (http://www.heliproz.com/GF-1045-C-1...ack-Carbon-Fill-GEMFAN/productinfo/GF-1045-C/)
After all my efforts it still rotating (yaw) to left all the time, I notice the motors on the front Right and rear left, always get hot even in a less than 1 minute flight. I did the ESC calibration on MultiWii program and manually one motor per time and it did not correct those situations.
Other wise it is fling well.
After all my efforts it still rotating (yaw) to left all the time, I notice the motors on the front Right and rear left, always get hot even in a less than 1 minute flight. I did the ESC calibration on MultiWii program and manually one motor per time and it did not correct those situations.
Other wise it is fling well.