• This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

RunCam Hybrid Enclosure

PsyBorg

Wake up! Time to fly!
#3
Nice compact print work. Have you tested the unit? If they are anything like the runcam splits that will get SUPER hot in a case like that. I think that is why they sell them without coverings. Be aware that may require a tiny computer fan to survive
 
#4
I've tested it and it works, however, I should revise it so that the buttons are accessible. If I make the openings bigger and reprint it, I'm sure the airflow will be enough to cool it.
 

PsyBorg

Wake up! Time to fly!
#5
Maybe add a slot for one of the mounting screws so the cameras can tilt a bit. Not all mounting positions will have the perfect camera angles. Learned that early with flying quads.
 
#6
It does have mount holes for the camera, but there's not enough space at the ends of the camera to allow for a pivot. I can add that functionality in the next rev.