Hi there! I'm a young kid getting into the hobby and started out by scratch building a mini arrow. I am wiring up my servos now and when I move the right stick horizontally the elevons pitch, and when I move the right stick vertically they roll. IDK if there is a way to switch channels 1 and 2 through the transmitter or is I just wired it wrong. Please help!
PS I already tried switching the servo wires on the receiver, same problem.
PPS I have an FS-I6 radio and stock receiver
PS I already tried switching the servo wires on the receiver, same problem.
PPS I have an FS-I6 radio and stock receiver