So, I have some scraps from a small toy plane. it runs only on 2 motors, and still functions. i ripped out the electronics, and i want to build a canard-style. I also have 2 quadcopters with 6 functioning motors. could i convert these to servos and make a normal plane that runs on the drone controls? the quads use a console controller-style remote. The blue plane remote is unsalvageable, but the red one works on both planes, or at least the remains of the blue plane. i also have plenty of spare propellers, so having them in one direction shouldn't be a problem. i think, that strafe controls might work for yaw, and maybe increasing or decreasing throttle could be pitch. however, it only has four propellers and four power plugs, one for each motor. also, it is self-stabilizing. i might have to remove the gyroscope and sensors, however i don't know if the drone will run with only one board, and without the sesnsors, as it has 2 boards.
Edit; the one on the top is now fixed. REEEEEEEEEEEEEEEEEEEEEEE *five decades later* eeeeeee...
Reee.
Edit 2; THE MOTOR BURNED OUT AGAIN!!! these are apparently brushless and NOT reliable especially in our oven simulator down here in florida.
Edit; the one on the top is now fixed. REEEEEEEEEEEEEEEEEEEEEEE *five decades later* eeeeeee...
Reee.
Edit 2; THE MOTOR BURNED OUT AGAIN!!! these are apparently brushless and NOT reliable especially in our oven simulator down here in florida.
Last edited: