I just finished building this tiny 10" wingspan glider design based heavily on the FT scratch builds.
-Print out the two letter-size drawings attached.
-Cut and glue the profiles to some dollar-store foam
-Carefully cut the foam following the printed profiles
-Form the airfoil using the method from the old speedster build
-Assemble and glue a quarter in the nose for balance (adjust weight as needed)
This is an experimental design that I sketched up for one of the kids my wife babysits. There are definitely improvements to be made so feel free to make adjustments. View attachment Dusty Glider pg2.pdf View attachment Dusty Glider Pg1.pdf
-Print out the two letter-size drawings attached.
-Cut and glue the profiles to some dollar-store foam
-Carefully cut the foam following the printed profiles
-Form the airfoil using the method from the old speedster build
-Assemble and glue a quarter in the nose for balance (adjust weight as needed)
This is an experimental design that I sketched up for one of the kids my wife babysits. There are definitely improvements to be made so feel free to make adjustments. View attachment Dusty Glider pg2.pdf View attachment Dusty Glider Pg1.pdf