ikem
Senior Member
Decided to build a Versa, and I had enough foam to do a little mini versa.
Here is the hardware!
Versa
AUW (estimated) 1100g
Mini Versa (16 inch)
AUW (estimated) 130g
I have the crafts built, and some things installed, but I have a lot ordered and just waiting on things.
I will post pictures later.
Here is the hardware!
Versa
- Turnigy SK3 1020kv
- 8.5x5 (Blunt Nose, cut from 11x5) CF Prop
- 2200mah 3s
- Orange RC 8ch RX
- Turnigy Metal gear servos
- Elmer's Foam Board
- Skywalker 30a ESC
- FT Pushrods and Control Horns
AUW (estimated) 1100g
Mini Versa (16 inch)
- Turnigy 1811 2900kv
- 4x3 (Blunt Nose, cut from 5x3) Prop
- Zippy Compact 350mah 2s
- Orange RC 6ch RX (stipping the plastic case)
- Turnigy Micro servos
- Elmer's Foam Board
- Turnigy Plush 6a ESC
- FT Pushrods and Control Horns
AUW (estimated) 130g
I have the crafts built, and some things installed, but I have a lot ordered and just waiting on things.
I will post pictures later.