Y6 Hexacopter


Junior Member
I'm in the process of building a Y6 hexacopter following Eric Monroe's video. Parts were purchased from Flitetest. I'm using a Naze 32 rev 6 board. Transmitter is a Spektrum DX6i and AR610 receiver. I'm at the point where I'm configuring the rig following Josh Bixler's video for the Naze 32 rev 6 using Cleanflight software. The Naze seems to be communicating ok with my laptop and is configured for the Y6. Cleanflight shows it rotating and moving correctly. I'm in the receiver section of the video but am getting no response whatsoever in any of the channels. I'm pretty sure I'm bound correctly and have a solid light on the receiver. On the Naze board I have a solid blue light and a blinking green light. Perhaps I have incorrectly connected the Naze to the receiver and/or ESCs. I'd like to independently test each but am unsure about the best way to do that. Any ideas/help would be greatly appreciated.
Marc in Clayton, NC


  • 7apr16-01-small.jpg
    323 KB · Views: 0