diy

SP0NZ FT Legacy Landing Gear Mount This landing gear mount is designed for the FT Legacy (Founders Plane). I'll add my default printer settings soon.

FT Legacy The Founders Plane Design By: Josh Bixler Plans By: Dan Sponholz Description: The FT Legacy was inspired by the Telelmaster. This was the plane that had the most impact on my personal growth as a pilot along with a legacy of its own. The Telemaster has been a workhorse for many...

FT Sea Angel Designed By: Josh Bixler, Andres Lu, and Jeremy Andrew Davis Plans By: Dan Sponholz Description: This is the FT SeaAngel. The Sea Angel is a unique aircraft modeled after Porco Rosso’s plane from the 1992 Hayao Miyazaki anime film made by Studio Ghibli as well as the 1925...

SP0NZ MiG Exhaust Semi-scale accessory for the Flite Test MiG-3 foam board RC model airplane. Exhaust stacks are designed to be hot glued to both sides of the nose on the MiG-3. Purchase the Speed Build Kits on the Flite Test Store: https://store.flitetest.com/ft-mig-3/ Or, download the...

Merlin Exhaust by SP0NZ Semi-scale accessory for the Flite Test FT Mustang and FT Spitfire foam board RC model airplane. Exhaust stacks are designed to be hot glued to both sides of the nose on the Mustang and Spitfire. Purchase the Speed Build Kits on the Flite Test Store FT Mustang...

SP0NZ STD Firewall This firewall is designed to work with the Flite Test swappable series power pods. Mounting holes are spaced specifically for the Flite Test Power Pack B and Power Pack C motors. Motor attachment is designed for self tapping screws included with these motors. I made the...

SP0NZ STD Control Horn This control horn is designed to work with most standard size Flite Test foam board RC model aircraft. The three push rod holes work with standard Flite Test push rods (.039) or can be drilled for use with E/Z connectors. I increased the thickness from the standard FT...

FT Simple Cub Designed By: Josh Bixler Floats Designed By: Andres Lu Plans By: Dan Sponholz Overview: Thank you for choosing the FT Simple Cub as your next FT project. Our passion at FliteTest is to introduce this great hobby to as many people as possible. It is also to make that journey as...

FT LongEZ Designed By: Alex Zvada & Josh Bixler Plans By: Dan Sponholz The Flite Test LongEZ is a great "bank and yank" semi scale DIY electric airplane kit. Simplicity was the theme of this design and our hopes are that it can be built and flying in no time! One motor, an ESC, and two servos...

FT LongEZ Designed By: Alex Zvada & Josh Bixler Plans By: Dan Sponholz The Flite Test LongEZ is a great "bank and yank" semi scale DIY electric airplane kit. Simplicity was the theme of this design and our hopes are that it can be built and flying in no time! One motor, an ESC, and two servos...

FT Charlie The Flite Test Charlie was designed to be a quick and easy to fly build, the slowest and least agile of the Triad series. The FT Charlie is compatible with the FT Alpha and FT Bravo kits. Each airplanes’ wings are built to be removable from the fuselage, and can be swapped with...

FT Goblin The FT Goblin was born from a collaboration between FliteTest and ReadyMade RC to create a foamboard version of their STRIX Goblin, a high-performance FPV plane. This plane fills the gap between the STRIX Goblin and the Nano Goblin in both size and speed, as it is scaled to fly off...

Hello all, I am selling my excess hobby grade depron. I have about 4 cases of 6x700x1000mm all from rcfoam.com. Each case has 20 sheets and I am selling each case for $100 ( plus shipping). I am trying to get rid of this stuff before I head back to college so I don't leave my poor mom with a...

My intial question: How do i get my motors to react to my stick movements?:confused: This may be a long shot but i was wondering if someone could help me trouble shoot this last problem i have before i can get my brushed micro in the air. I am using Flysksy FS-i6 with a flysky receiver, they...

hey guys its great coming back here after a few years without serious building in the hobby for me i have a lot expirience in fixed wing and scratch builds and i like this aspect of how flitetest used to be all about taking day to day materials and construcing them into a working flying frame. i...

hello, everyone. first of all, I'm severely dyslexic so sorry for the horrible spelling/grammar, if you don't understand me don't hesitate to ask me to translate XD. built an FTspear and after seeing how much space I have for more equipment I'm itching to get some sort of PFV setup in there...

RASCAL CNC CUT IT - BUILD IT - FLY IT The Team: Nic Lechner (nerdnic) Todd Optional (Litke) () Kevin Matusik (blackkrystal73) Dan Sponholz (SP0NZ) The Goal: Deliver free plans and instructions to build a DIY hobby-grade CNC machine focused on the model airplane community. Dedication...

Hi All! This is my first time posting here, though I've been lurking around for a few weeks trying to build up the courage to actually build something. After a fair bit of research, I've decided I want to give the Tiny Trainer a shot. It seems straightforward and like it would be a good first...

I searched but did not see any topics for 3D printed parts, planes, etc. Though I have been blind to things in front of my face before. So forgive me if its been done before. I thought it would be great to have a thread for everyone to share their RC related 3D models, or even just cool things...

Hi, I built the Quad bellow but I need a new flight stack for it, the one I have is running 20A ESC but and keeps crashing (i mean the software locking up not my flying!) It was cheap and as I can now tell nasty. The quad is 90mm, weights about 150 grams, I looking to run 3s batteries and...