twin

  1. Pieliker96

    Plane DHC-4 Caribou v1.0

    The DHC-4 Caribou uses Twin C pack and a 3000 4s. It features retracts with landing gear doors, slotted flaperons, double-slotted main flaps, and actuating upper and lower cargo bay doors. It uses 13 sheets of DTFB, 1 sheet of cardstock or posterboard, and 2 sheets of 1'x2'x1/8" plywood, among...
  2. Flitedesign 3d

    SU-27 Build Guidance and Pictures

    This is the build assistance thread for the SU-27. If you want to give this jet a try this is the place you can share your journey and ask for help. Plans for the SU-27 here: https://forum.flitetest.com/index.php?resources/sukhoi-su-27.239/ Development thread...
  3. Flitedesign 3d

    Plane Sukhoi SU-27 1.0

    This is the first version of the plans for my twin edf Sukhoi SU-27. This jet is a high performance jet powered by two 12-blade 70 mm ducted fans and it has a thrust/weight ratio of 1.2 if built right. It is decently fast, very maneuverable and good looking aircraft. It is a rather challenging...
  4. CE31A168-FEA0-4150-ADA0-4988F3FBDA1C.jpeg

    CE31A168-FEA0-4150-ADA0-4988F3FBDA1C.jpeg

  5. Pieliker96

    Plane Cormorant II 1.2.1

    The Cormorant II uses twin F pack and a 2250 3s which gives it a aerobatically-oriented thrust-to-weight ratio. It can be configured with optional Fowler Flaps and Drooperons, which enhance slow flight and roll rate respectively. It uses 5 sheets of DTFB. For ongoing developments and more...
  6. Mid7night

    Plane F-4 Phantom - Twin 70mm EDF Monster v4

    F-4 Phantom II Power: 2 x 70mm EDF Battery: 6000mAh, 4S Wingspan: 36 inches Length: 54 inches Weight: 85 ounces - (5lb, 5oz) - (2.4Kg) BOTH PDF AND ZIP files are available, in case you want to run it on a CNC or laser. :D Build thread is here...
  7. Mid7night

    Plane F-5 Twin 50mm EDF v2

    After flying (and crashing) my C-17, I decided to repurpose two of the EDFs in a new jet: the F-5 Tiger-II! It's not the prettiest jet on the block, but it's fast so be ready! Build thread is here: https://forum.flitetest.com/index.php?threads/f-5-twin-50mm-edf.34509/
  8. flitetest

    Plane FT Mini Guinea 1.1

    FT Mini Guinea Designed By: Peter Sripol Plans By: Dan Sponholz Description: The FT Mini Guinea is a small twin with a big personality. Now made with Master Foam this plane offers so much versatility it is insane! Whether you are a beginner looking to build your first twin or you are an...
  9. Spr0ck3t

    Plane Phat Slug 1.1

    This is a Radio-Controlled foamboard-based A-Tail plane with a 2m wingspan made out of 6mm foamboard (the one used as floor insulation in Europe). Follow the instructions. The build process is very similar to Flite Test planes. The included motor mount files are for A2212 motors. You can very...
  10. flitetest

    Plane FT Guinea Pig 1.1

    FT Guinea Pig Designed By: Peter Sripol Plans By: Dan Sponholz Description: The Flite Test Guinea Pig is the perfect platform to carry out the craziest experiments in the air. While it can carry a hefty payload, which can be dropped out the rear hatch, it can also be set up to carry out...
  11. Mid7night

    XF-18 Super Hornet - Twin 70mm EDF Jet - Build Pics & Plans

    FINALLY! I know many have been asking for these plans for a while, and now I've finally got the plans finished (enough) and enough build pics that I think it's time to release them to the wild. First, here are the jet's specs: Wingspan: 41" Length: 59" Power: Twin 70mm EDF (up to 74mm)...
  12. FoamyDM

    Plane Remington Burnelli 2 (RB-2) "Flying Camper" by FoamyDM 1.0

    The Remington Burnelli 2- "Flying Camper" Bring the piece of history to life and watch it float through the air. HISTORY In the 1920's this early airliner design was used as a mobile car showroom! Now you can build one of your own. Like all biplanes of the post WWI era, this balance is short...
  13. Aero_Knight

    FT Style Mini P-38/61 "Black Lightning"

    There is a post for future FT Plan Ideas and there was some discussion on the P-38 and I decided to jump in and do a design from scratch and it ended up being a bit more than what the original goal was. Thoughts, opinions, ideas are welcome while I finalize the design. Here is the result of a...
  14. J

    70mm EDF, 2 NTM motors and 4 servos. Any ideas?

    So I'm in a slightly awkward situation. I have an X-29 with movable canards and modified with a landing gear. I'm unable to get it off the ground and I think I'll get one flight out of it then build something else, already lost my patience with that one... I also have two 1100kv NTM 28-26 motors...
  15. Aero_Knight

    FTFC19 VF-1 Foam Valkyrie designed by Carlos AR

    The Plan: (As of 09/18/18 09/17/18) This thread will keep track of my progress as I try to design and build an aircraft based on the VF-1A Valkyrie and two of its specialized modes, the FIGHTER and GERWALK. I have been wanting to try this for years and decided to bite the bullet and put some...
  16. Mid7night

    Part 3D Printed Motor Mount Pod 1

    This is a motor mount & pod that I made for my highly modified FT Super Bee, because I wanted a stronger motor mount for my application, but it can be used anywhere similar motor mounts are found on FT planes. If using on the FT Super Bee, you will need to cut two additional slots in the...
  17. Jordan3367

    The Dragonfly: a twin mini biplane

    Hey all! It's been a while since I've done anything but I wanted to share my younger brother's custom designed and built foamboard twin biplane with you guys. He drew it, redrew it as a dxf, cnc'd it, built it, flew it, and here it is. :) Specs: 2x Red-bottom motors & 25a escs 5x 9g servos...
  18. Dr. Looping Looie

    Mighty mini REDAQ a mini twin seaplane

    My second project for the holidays: This really smart saeplane. The Redaq 1.8 is not my own design, the original EPP version was designed by Dieter W. and is well known in the german seaplane flyer community, you can find it at almost every event. I want to build a mini foamboard version with FT...
  19. S

    Two minis, one power pack

    My 9 year old (nearly 10) daughter is showing an interest in these planes, and I could use something a bit slower for casual flights in the tiny field behind our office. My Spear is just too fast for my skillset in such tight quarters at the moment. So, I'm thinking about putting together a...
  20. S

    Mini Guinea motor issue!

    Hey guys I need some technical advice. the build for my guinea is complete and all electronics are working fine but one of the motors spins up a little slower than the other and is causing yaw. this is my first twin so I guess it's something basic. set up 2x 12 amp esc 2x 1806 A pack motors...